Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 24441 |
| Ambient temperature | 0 ... 70 °C (32 ... 158 °F) |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Degree of protection | IP67 according to EN 60529 The protection class appplies only for installation of the module in a connection housing for parts of the module located outside of the connection housing (external M12 connection, inside cable connection). The housing duct must be sealed with a suitable adhesive. |
| Connection | AS-Interface and auxiliary voltage: M12x1 round connector auxiliary voltage, input and outputs: 20 cm connection cable |
| Mass | 110 g |
| Switching point | OFF ≤ 0.8 mA ON ≥ 5 mA |
| Electromagnetic compatibility | acc. to EN 50081-2 / EN 50082-2 |
| Current | 20 mA per output |
| Shock and impact resistance | ≤ 15 g at T ≤ 11 ms, 10 ... 55 Hz, 0,5 mm amplitude |
| Rated operating current | ≤ 30 mA |
| Supply | from external auxiliary voltage U |
| LED PWR | AS-Interface voltage; LED green |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Number/Type | 3 electronic outputs, PNP |
| AS-Interface specification | V2.1 |
| Insulation voltage | ≥ 500 V |
| AS-Interface | EN 62026-2:2013 |
| Slave type | A/B slave |
| Required master specification | ≥ V2.0 |
| Profile | S-9.A.E |
| IO code | 9 |
| ID code | A |
| ID2 code | E |
| D0 | - OUT1 |
| D1 | - OUT2 |
| D2 | - OUT3 |
| D3 | IN1 - |
| P0 | not used |
| P1 | not used |
| P2 | not used |
| P3 | not used |
| LED FAULT | communication error / address is 0; LED red |
| Auxiliary voltage (output) | 24 V DC ± 15 % PELV , not short-circuit protected |
Сравнение
Избранное
