Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 48360 |
Control elements | Control panel |
Ripple | within the supply tolerance |
UL approval | E223772 |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 250 g |
Rated voltage | 20 ... 35 V DC |
Power consumption | max. 3 W |
Type | RS-485 |
Sensor supply | 1 ... 5 V |
Analog voltage output | 0 ... ± 10 V; output resistance 500 Ω (bridge between terminal 7 and 9) |
Analog current output | 0 ... ± 20 mA or 4 ... 20 mA; load 0 ... 550 Ω (terminals 7 and 8) |
Electromagnetic compatibility | NE 21:2006 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 |
Mechanical life | 2 x 10 switching cycles |
Labeling | space for labeling at the front |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Contact loading | 253 V AC/2 A/500 VA/cos φ min. 0.7; 40 V DC/2 A resistive load |
Input I | Signal, analog |
Output III | Analog output |
Display elements | LEDs , display |
Configuration | via operating buttons via PACTware |
Directive 2004/108/EC | EN 61326-1:2006 |
Short-circuit current | 50 mA |
Connection side | control side |
Reaction time | 300 ... 850 ms |
Load | max. 550 Ω |
Input resistance | > 1 MΩ for voltage measurement |
Line fault detection | downscale -21.5 mA (-10.75 V) or 2 mA (1 V), upscale 21.5 mA (10.75 V) |
Directive 2006/95/EC | EN 61010-1:2010 |
Signal type | Analog input |
Open circuit voltage/short-circuit current | 18 V / 5 mA |
Programming interface | programming socket |
Active/Passive | I > 4 mA/I < 1.5 mA |
Output I, II | Relay output |
Current range | -20 ... 20 mA |
Output I, II/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
Input I/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
Lead resistance | max. 25 Ω per line |
Resolution/accuracy | ≤ ± 0.05 % incl. non-linearity and hysteresis |
Input signal | -100 ... 100 mV |
Programmable Tare | 0 ... 500 % of span |
Input II, III | tare adjustment, calibration and zero |
Collective error message | Power Rail |
Temperature effect | ≤ ± 0.01 %/K |
Output I, II against eachother | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
Output III/Input II, III | not available |
Output III/Programming socket | not available |
Other circuits from each other | functional insulation, rated insulation voltage 50 V |