Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 55900 |
| Ripple | within the supply tolerance |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 130 g |
| Rated voltage | 20 ... 30 V DC |
| Electromagnetic compatibility | NE 21:2006 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Potentiometer | 0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection) |
| Labeling | space for labeling at the front |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Safety Integrity Level (SIL) | SIL 2 |
| Display elements | LEDs |
| Optional accessories | - FDT framework PACTware 5.X - device type manager DTM Interface Technology - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-GY(-UPR-03) |
| Fault signal | downscale 0 V or 0.5 V, upscale 5.375 V |
| Configuration | via PACTware |
| Voltage | selectable within the range -100 ... 100 mV |
| Connection side | control side |
| Reaction time | worst case value (sensor breakage and/or sensor short circuit detection enabled) mV: 1.2 s, thermocouples with CJC: 1.4 s, thermocouples with fixed ref. temp: 1.4 s, 3- or 4-wire RTD: 1.1 s, 2-wire RTD: 920 ms, Potentiometer: 3-wire connection 2.8 s, 2-wire connection 2.25 s |
| Input resistance | ≥ 1 MΩ (-100 ... 100 mV) |
| Measuring current | approx. 200 µA with RTD |
| Signal type | Analog input |
| Programming interface | programming socket |
| Influence of ambient temperature | deviation of CJC included: ± (0.0015 % of measurement value in K + 0.006 % of span)/K ΔT ± (0.02 K + 0.005 % of measurement value in °C + 0.006 % of span)/K ΔT ± (0.01 % of measurement value + 0.006 % of span)/K ΔT ± 0.006 % of span/K ΔT ΔT = ambient temperature change referenced to 23 °C (296 K) |
| Input/Other circuits | basic insulation according to IEC 61010-1, rated insulation voltage 300 V |
| Power dissipation/power consumption | ≤ 0.8 W / 0.8 W |
| Lead resistance | max. 50 Ω per line |
| After calibration | ± (0.06 % of measurement value in K + 0.1 K (4-wire connection)) ± (0.05 % of measurement value in °C + 1 K (1.2 K for types R and S)) this includes ± 0.8 K error of the cold junction compensation ± 50 µV ± 0.05 % of full scale, (excludes errors due to lead resistance) 1 to 5 V output: ± 4 mV from 0 to 103.1 % of span; 0 to 5 V output: ± 4 mV from 0.3 to 102.5 % of span |
| RTD | type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995) type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94) type Cu10, Cu50, Cu100 (P50353-92) type Ni100 (DIN 43760) |
| Thermocouples | type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) type TXK, TXKH, TXA (P8.585-2001) |
| Cold junction compensation | external and internal |
| Types of measuring | 2-, 3-wire connection |
| Measurement loop monitoring | sensor breakage |
| Voltage output | 0 ... 5 V or 1 ... 5 V ; output resistance: ≤ 5 Ω ; load: ≥ 10 kΩ |
| Influence of supply voltage | < 0.01 % of span |
| Output/supply, programming input | functional insulation, rated insulation voltage 50 V AC There is no electrical isolation between the programming input and the supply. The programming cable provides galvanic isolation so that ground loops are avoided. |
Сравнение
Избранное
