Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 88477 |
UL approval | cULus Listed, Type 1 enclosure |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Degree of protection | housing: IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* M12 socket: IP67/IP68/IP69K |
Connection | AS-Interface: AS-Interface flat cable In-/outputs & matching connector: M12 connector, 5-pin, A-coded, acc. to IEC 61076-2-101:2012 |
Housing | PBT PC |
Mass | 84 g |
Protection class | III |
Contacts | CuSn / Au |
Body | black PUR |
Cable | PUR |
Sheath diameter | ∅4.8 mm |
Color | black |
Cores | 5 x 0.34 mm |
Length | 1 m |
Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
Shock and impact resistance | 30 , 11 ms in 6 spatial directions 3 shocks 10 , 16 ms in 6 spatial directions 1000 shocks |
Tightening torque, fastening screws | 1.65 Nm |
Rated operating current | ≤ 40 mA (without inputs/outputs) / max. 200 mA |
Emitted interference | EN 61000-6-4:2011 |
Noise immunity | EN 61000-6-2:2005 , EN 62026-2:2013 |
Directive 2014/30/EU | EN 62026-2:2013 |
Supply | from AS-Interface |
Fieldbus standard | EN 62026-2:2013 |
LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
Voltage | ≥ (U - 9.0 V) |
Mounting screw | Stainless steel 1.4305 / AISI 303 |
Current loading capacity | ≤ 150 mA Total current , overload and short-circuit protected |
Rated operating voltage | 18.5 ... 31.6 V from AS-Interface |
UL File Number | E223772 "For use in NFPA 79 Applications only" |
Number/Type | 2 electronic outputs, PNP, overload and short-circuit proof |
Surge protection | U : Over voltage category III, safe isolated power supplies (PELV) |
Signal delay | < 1 ms (input/AS-Interface) |
Input current | ≤ 8 mA (limited internally) |
AS-Interface specification | V3.0 |
AS-Interface | EN 62026-2:2013 |
MTBF | 379 a |
Slave type | A/B slave |
Required master specification | V3.0 |
0 (unattenuated) | ≤ 0.5 mA |
1 (attenuated) | ≥ 2 mA |
Profile | S-7.A.7 |
IO code | 7 |
ID code | A |
ID1 code | 7 |
ID2 code | 7 |
D0 | IN1 OUT1 |
D1 | IN2 OUT2 |
D2 | IN1 OUT1 |
D3 | IN2 OUT2 |
P0 | communication monitoring P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition |
P1 | Input filter P1 = 0 input filter on, pulse suppression ≤ 2 ms P1 = 1 input filter off (default settings) |
P2 | Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings) |
P3 | not used |
Tightening torque, cable gland | 0.4 Nm |
LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload |