Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 4117 |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Degree of protection | IP67 |
| Connection | cable piercing method or terminal compartment yellow flat cable/black flat cable or standard round cable inputs/outputs:M12 x 1.5 cable glands and cage tension spring terminals |
| Housing | PA 6 GF30 |
| Mass | 180 g |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Relative humidity | 85 % , noncondensing |
| Altitude | ≤ 2000 m above MSL |
| Mounting | DIN rail or screw mounting |
| Protection class | III |
| Current | 1 A per output |
| Pollution degree | 3 |
| Rated operating current | ≤ 30 mA (without sensors) / max. 140 mA |
| Emitted interference | EN 61000-6-4:2001 |
| Noise immunity | EN 61000-6-2:2001 |
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2001 EN 61000-6-4:2001 |
| Supply | from external auxiliary voltage U |
| Voltage | ≥ (U - 0.5 V) |
| Climatic conditions | For indoor use only |
| Tightening torque, housing screws | 0.8 Nm |
| Current loading capacity | ≤ 100 mA (T ≤ 40 °C), ≤ 75 mA (T ≤ 60 °C), overload-proof and short-circuit protected |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| UL File Number | E223772 |
| Number/Type | 2 electronic outputs, PNP overload and short-circuit proof |
| Surge protection | U , U : Over voltage category III, safe isolated power supplies (PELV) |
| Input current | ≤ 8 mA (limited internally) |
| AS-Interface specification | V2.1 |
| AS-Interface | EN 62026-2:2013 |
| Slave type | A/B slave |
| Required master specification | ≥ V2.1 |
| LED PWR/FAULT | dual LED green/red green: AS-Interface voltage red: communication error or address 0 green/red flashing: overload sensor supply or outputs |
| LED IN | switching state (input); 2 LED yellow |
| 0 (unattenuated) | ≤ 2 mA |
| 1 (attenuated) | ≥ 4 mA |
| Input | EN 61131-2:2007 |
| Profile | S-B.A.0 |
| IO code | B |
| ID code | A |
| ID1 code | 7 |
| ID2 code | 0 |
| D0 | - OUT1 |
| D1 | - OUT2 |
| D2 | IN3 - |
| D3 | IN4 - |
| P0 | not used |
| P1 | not used |
| P2 | not used |
| P3 | not used |
| Auxiliary voltage (output) | 24 V DC ± 15 % PELV |
| LED OUT | Switching state (output); 2 LED yellow |
Сравнение
Избранное
