Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Switch Amplifier KCD2-ST-2.SP 58037

Switch Amplifier KCD2-ST-2.SP

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 58037
Цена: 2 210 190 Руб
Купить

Цены носят информационный характер и не являются публичной офертой. Точную цену и срок поставки подтвердит менеджер при оформлении заявки

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • 2-channel signal conditioner
  • 24 V DC supply (Power Rail)
  • Dry contact or NAMUR inputs
  • 2 active transistor outputs
  • Reversible mode of operation
  • Line fault detection (LFD)
  • Housing width 12.5 mm
  • Connection via spring terminals with push-in connection technology
  • Up to SIL 2 acc. to IEC 61508
Параметр Значение
Общие характеристики
Артикул 58037
Control elements DIP-switch
Ripple ≤ 10 %
Switching frequency ≤ 5 kHz
Response time ≤ 200 µs
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Degree of protection IP20
Connection spring terminals
Mass approx. 100 g
Rated voltage 30 V DC
Electromagnetic compatibility NE 21:2011
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Dimensions 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2
Labeling space for labeling at the front
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Rated current 50 mA
Output I signal ; Transistor
Output II signal ; Transistor
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Safety Integrity Level (SIL) SIL 2
Display elements LEDs
Optional accessories - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-GY(-UPR-03)
Power dissipation ≤ 800 mW including maximum power dissipation in the output
Configuration via DIP switches
Signal level 1-signal: (supply voltage) - 3 V max. for 50 mA 0-signal: blocked output (off-state current ≤ 10 µA)
Connection side control side
Input EN 60947-5-6:2000
Input/Output reinforced insulation acc. to EN 50178, rated insulation voltage 300 V
Output/Output not available , common pole terminal 9+
Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Signal type Digital Input
Rated values acc. to EN 60947-5-6 (NAMUR)
Open circuit voltage/short-circuit current approx. 10 V DC / approx. 8 mA
Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
Input/power supply reinforced insulation acc. to EN 50178, rated insulation voltage 300 V
Output/power supply not available , common pole terminal 9+
Protection against electrical shock IEC 61010-1:2010
Collective error message Power Rail
Pulse/Pause ratio min. 100 µs / min. 100 µs

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Пользовательского соглашения.

Спасибо!

Ваше сообщение успешно отправлено