Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 52668 |
Control elements | DIP-switch |
Ripple | ≤ 10 % |
Switching frequency | ≤ 10 Hz |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Degree of protection | IP20 |
Connection | spring terminals |
Mass | approx. 100 g |
Rated voltage | 19 ... 30 V DC |
Power consumption | ≤ 600 mW |
Electromagnetic compatibility | NE 21:2006 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
Mechanical life | 10 switching cycles |
Labeling | space for labeling at the front |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Rated current | ≤ 30 mA |
Output I | signal ; relay |
Contact loading | 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/4 A/cos φ > 0.7; 30 V DC/2 A resistive load |
Output II | signal ; relay |
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Safety Integrity Level (SIL) | SIL 2 |
Display elements | LEDs |
Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-GY(-UPR-03) |
Power dissipation | ≤ 600 mW |
Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms |
Configuration | via DIP switches |
Directive 2014/35/EU | EN 61010-1:2010 |
Connection side | control side |
Input/Output | reinforced insulation acc. to EN 50178, rated insulation voltage 300 V |
Output/Output | reinforced insulation acc. to EN 50178, rated insulation voltage 300 V |
Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA |
Signal type | Digital Input |
Rated values | acc. to EN 60947-5-6 (NAMUR) |
Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
Minimum switch current | 2 mA / 24 V DC |
Input/power supply | reinforced insulation acc. to EN 50178, rated insulation voltage 300 V |
Output/power supply | reinforced insulation acc. to EN 50178, rated insulation voltage 300 V |
Input/input | Basic insulation according to EN 50178, rated insulation voltage 300 V |
Safety note | If load voltage > 50 V, de-energize before removing the terminals. |
Pulse/Pause ratio | min. 20 ms / min. 20 ms |