Пт-Пн: 9:00 - 18:00

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Цены носят информационный характер и не являются публичной офертой. Точную цену и срок поставки подтвердит менеджер при оформлении заявки
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 42974 |
| Control elements | DIP-switch |
| Ripple | ≤ 10 % |
| Switching frequency | ≤ 10 Hz |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Rated voltage | 19 ... 30 V DC |
| Power consumption | ≤ 500 mW |
| Electromagnetic compatibility | NE 21:2006 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Mechanical life | 10 switching cycles |
| Labeling | space for labeling at the front |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Rated current | ≤ 30 mA |
| Output I | signal ; relay |
| Contact loading | 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/4 A/cos φ > 0.7; 30 V DC/2 A resistive load |
| Output II | signal or error message ; relay |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Safety Integrity Level (SIL) | SIL 2 |
| Display elements | LEDs |
| Power dissipation | ≤ 500 mW |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms |
| Configuration | via DIP switches |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Connection side | control side |
| Input/Output | reinforced insulation acc. to EN 50178, rated insulation voltage 300 V |
| Output/Output | reinforced insulation acc. to EN 50178, rated insulation voltage 300 V |
| Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA |
| Signal type | Digital Input |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Minimum switch current | 2 mA / 24 V DC |
| Input/power supply | reinforced insulation acc. to EN 50178, rated insulation voltage 300 V |
| Output/power supply | reinforced insulation acc. to EN 50178, rated insulation voltage 300 V |
| Pulse/Pause ratio | min. 20 ms / min. 20 ms |