Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 93132 |
| Ripple | 20 mV |
| Switching frequency | ≤ 500 Hz with 50 % duty cycle (digital input, NAMUR sensor) ≤ 5 Hz (digital input, dry contact) ≤ 20 Hz (digital output) |
| UL approval | E106378 |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) Observe the temperature range limited by derating, see section derating. |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Degree of protection | IP20 |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Mass | approx. 100 g |
| Rated voltage | 19 ... 30 V DC via Termination Board |
| Power consumption | ≤ 700 mW |
| Deviation | at 20 °C (68 °F) ≤ ±20 µA incl. linearity, hysteresis and supply fluctuations at 4 ... 20 mA (analog input, analog output) ≤ ±60 µA incl. linearity, hysteresis and supply fluctuations at 0 ... 45 mA (digital output) |
| Electromagnetic compatibility | NE 21:2011 |
| Relative humidity | 95 % non-condensing |
| Mounting | on Termination Board |
| Voltage drop | approx. 4 V (current source) |
| Current | 13 mA |
| Marking | II 3G Ex ec IIC T4 Gc |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| EU-type examination certificate | TÜV 14 ATEX 153522 X |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Power | 41 mW |
| Signal | 0.1 ... 9 mA |
| Rated current | ≤ 30 mA |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Certificate | TÜV 14 ATEX 153523 X |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015 |
| Safety Integrity Level (SIL) | SIL 2 |
| Power dissipation | 1.1 W at 24 V, 300 Ω load (digital output) |
| Control drawing | 116-0408 (cULus) |
| IECEx certificate | IECEx TUN 15.0004X |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| Voltage | 12.6 V |
| Maximum safe voltage | 250 V (Attention! The rated voltage can be lower.) |
| Reaction time | ≤ 5 ms , turn-on/turn-off time (digital output) |
| Current limit | 45 mA |
| Input | EN 60947-5-6:2000 |
| Load | 0 ... 650 Ω |
| Line fault detection | > 100 kΩ at max. 30 V, with field wiring open |
| Open loop voltage | approx. 22 V |
| Signal type | Universal |
| Frequency range | HART: bandwidth by 0.5 V signal and/or 1 mA signal 950 ... 2500 Hz (analog input, analog output) |
| Influence of ambient temperature | < 2 µA/K (0 ... 70 °C (32 ... 158 °F)) < 3 µA/K (-40 ... 0 °C (-40 ... 32 °F)) |
| Input/Other circuits | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Protection against electrical shock | IEC 61010-1:2010 |
| Internal resistor | min. 240 Ω |
| Coding | pin 1 and 4 trimmed For further information see system description. |
| Drive capability | 12 V / 40 mA at 300 Ω load |
| Suitable field devices | solenoid valves, acoustic or visual alarms |
| Supply voltage | min. 16 V at 20 mA (2-wire SMART transmitter) |
| Equipment | SL2: 5a(+), 1a(-) |
| Settling time | ≤ 20 ms (analog input, analog output) ≤ 1 ms (digital input, NAMUR sensor) |
| Control/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V |
Сравнение
Избранное
