Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 42971 |
| Control elements | DIP-switch |
| Ripple | ≤ 10 % |
| Switching frequency | ≤ 10 Hz |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 |
| Connection | SL1: 6b |
| Mass | approx. 100 g |
| Rated voltage | 19 ... 30 V DC bus powered via Termination Board |
| Power consumption | ≤ 600 mW |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| Mounting | on Termination Board |
| Current | 17.1 mA |
| Marking | II 3G Ex nA nC IIC T4 Gc |
| Output type | open collector transistor (internal fault bus) |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Mechanical life | 10 switching cycles |
| Labeling | space for labeling at the front |
| EU-type examination certificate | BASEEFA 06 ATEX 0093 X |
| IECEx approval | IECEx BAS 06.0026X |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Power | 45 mW (linear characteristic) |
| Rated current | ≤ 30 mA |
| Output I | signal ; relay |
| Contact loading | 50 V DC / 0.5 A |
| Output II | signal ; relay |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Certificate | PF 08 CERT 1047 X |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| Safety Integrity Level (SIL) | SIL 2 |
| Display elements | LEDs |
| Power dissipation | ≤ 600 mW |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms |
| Configuration | via DIP switches |
| Control drawing | 116-0434 |
| Galvanic isolation | EN 50178:1997 |
| Voltage | 10.5 V |
| Maximum safe voltage | 253 V AC (Attention! The rated voltage can be lower.) |
| Connection side | control side |
| Input | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Output/Output | basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC |
| Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA |
| Signal type | Digital Input |
| Rated values | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Minimum switch current | 2 mA / 24 V DC |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Output/power supply | basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC |
| Coding | pin 1 and 2 trimmed For further information see system description. |
| Pulse/Pause ratio | min. 20 ms / min. 20 ms |
Сравнение
Избранное
