Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 43358 |
UL approval | QUZW7.E106378 |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) , 70 °C (non-Ex) |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Degree of protection | IP20 (module) , mounted on backplane |
Connection | device plug (accessories) front connector for letterbug and service bus |
Mass | 150 g |
Rated voltage | 5 V DC , only in connection with the power supplies FB92** |
Power consumption | 2 W |
Electromagnetic compatibility | NE 21 |
Relative humidity | 95 % non-condensing |
Marking | II 3 G Ex nA IIC T4 |
Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance |
Dimensions | 32 x 100 x 103 mm (1.26 x 3.9 x 4 inch) |
Labeling | space for labeling at the front |
IECEx approval | BVS 08.0011X |
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
System information | The module has to be mounted in appropriate backplanes (LB9***) in Zone 2 or outside hazardous areas. Here, observe the corresponding declaration of conformity. For use in hazardous areas (e. g. Zone 2 or Zone 22) the module must be installed in an appropriate enclosure. |
LED indication | LED green: supply LED red: fault LED yellow: communication status |
Directive 2014/30/EU | EN 61326-1 |
Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 |
Certificate | PF 08 CERT 1234 |
Directive 2014/34/EU | EN 60079-0 , EN 60079-1 , EN 60079-11 |
Supply | only in connection with the power supplies LB9*** |
Fieldbus standard | HDLC via terminals on backplane |
Damaging gas | for plugs: 21 days in 25 ppm SO , at 25 °C and 75 % rel. humidity, device G3 |
Environmental test | HDLC to ISO 13239 |
Bus length | max. 150 m (500 feet) |
Station connection | directly to PCS |