Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 38145 |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Degree of protection | IP20 |
Connection | spring terminals, max. 1.5 mm |
Mass | 1500 g |
Rated voltage | 18 ... 32 V , typical: 24 V |
Power consumption | 4.8 W |
Electromagnetic compatibility | EN 61000-4-2/3/4/5/6, EN 55022, NE 21 |
Relative humidity | max. 100 % , moisture condensation allowable |
Mounting | DIN rail mounting |
Interface type | RS-485 |
Wave length | 860 nm |
Transfer rate | 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
Length | 200 m ... 1000 m, depending on baud rate |
Marking | II 2 G Ex e mb [ib] op is IIC T4 |
Vibration resistance | 1 g , 58 ... 150 Hz according to IEC 60068-2-6 |
Dimensions | 156 x 125 x 75 mm |
LED indicator | LED System (red/green): Operating voltage and bitrate, LED CH1 (red/yellow): electric channel, LED CH2, CH3 (red/yellow): optic channel |
EU-type examination certificate | PTB 07 ATEX 2021 X |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Cable length | Multi-mode fiber (MM) 50/125: 3000 m, 13 dB link budget at 860 nm; A = 3 dB/km; 3 dB buffer Multi-mode fiber (MM) 62,5/125: 3000 m, 15 dB link budget at 860 nm; A = 3,5 dB/km; 3 dB buffer |
GOST-R approval | RU C-IT.MIII06.B.00129 |
INMETRO | Brazil: TÜV 14.1594X |
Directive 94/9/EC | EN 60079-0:2006 EN 60079-7:2007 EN 60079-11:2007 EN 60079-18:2004 EN 60079-28:2007 |
Rated current | approx. 200 mA |
Fieldbus type | PROFIBUS DP, DP V1, DP V2, FMS |
Terminating resistor | integrated, switchable on |
Signal delay | < 6.5 bit times |
ATEX approval | PTB 07 ATEX 2021X |
Connector type | BFOC/2.5 |
Lloyd Register | c15-20021 |
Redundancy | HIPER ring |
Signal contact (safety extra-low voltage) | max. DC 60 V, AC 24 V, 1 A (Ex e) |
Optical input power | min. -28 dBm, max. -3 dBm |
Launchable optical power | in multi-mode fiber (50/125): (50/125): -15 dBm (62,5/125): - 13 dBm |
PROFIBUS DP/Supply | functional insulation acc. to DIN EN 50178 |