Пт-Пн: 9:00 - 18:00
Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Цены носят информационный характер и не являются публичной офертой. Точную цену и срок поставки подтвердит менеджер при оформлении заявки
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 17200 |
| Материал | F14 housing: polyester PBT-FR F34 housing F34: aluminum Probe: PPS GF40 probe rope: PE-HD probe rope seal: VMQ |
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) -40 ... 60 °C (-40 ... 140 °F) (Dust-Ex version) |
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) |
| Degree of protection | IP66, NEMA 4 |
| Connection | gland M20 thread G1/2, NPT1/2 |
| Rated voltage | electrical connection E5: 10.8 ... 45 V DC, short-term pulse on 55 V DC electrical connection WA: 20 ... 235 V AC, 50/60 Hz or 20 ... 55 V DC |
| Electromagnetic compatibility | NE 21 |
| Construction type | device rope probe |
| Operating mode | MAX = maximum safety: The device switches if the probe is covered or if the supply voltage is disconnected in a safety-oriented manner (signal on alarm). example application: overspill protection MIN = minimum safety: The device switches if the probe is uncovered or if the supply voltage is disconnected in a safetyoriented manner (signal on alarm). example application: dry-running protection |
| Measurement range | dielectric constant ≥ 1.6 |
| Output signal | connection E5: switching PNP, I = 200 mA - overload and short circuit protection - residual voltage at transistor at I < 2.9 V connection WA: contact change-over, potential-free - U = 253 V - I = 4 A (AC) - P = 1000 VA, cos φ = 1, P = 500 VA, cos φ > 0.7 |
| Reference operating conditions | vessel type: plastic vessel, ambient temperature: 73 °F (23 °C, 296 K), medium temperature: 73 °F (23 °C, 296 K) medium pressure p : 0 bar, medium: dielectric constant = 2.6, conductivity: < 1 µS sensitivity setting: C |
| Vibration resistance | a(RMS) = 50 m/s , ASD = 1.25 (m/s ) /Hz, f = 5 to 2000 Hz, t = 3 x 2 h |
| Dimensions | max. ∅94 mm (3.7 inch), length 140 mm (5.5 inch) + L L = 500 ... 6000 mm (19.7 ... 236 inch) |
| Process connection | thread R1-1/2 acc. to EN 10226, BSPT thread NPT1-1/2 to ANSI B 1.20.1 |
| Hysteresis | vertical 5 mm (0.2 inch) |
| Measuring method | A metal plate at the end of the probe, within the insulation, and the surroundings (e. g. the silo walls) combine to form the two electrodes of a capacitor. If the probe is covered or free of material, then the capacitance changes and the LCL switches. |
| EU-type examination certificate | see instruction manuals (SI) |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Switch-on delay | correct switching after max. 2 s |
| Directive 2014/30/EU | EN 61326-1:2006 , EN 61326-2-3:2006 |
| Shock resistance | device with F34 housing: 7 J |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2009 |
| Equipment architecture | The measuring system consists of: - the device - a supply point - the connected control systems, switching units, signalling systems (e. g. lamps, horns, PCS, PLC, etc.) |
| Optional accessories | LCL-Z10 cover with sight glass for F14 housing LCL-Z14 rope shortening set |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Current consumption | electrical connection E5: max. 30 mA, reverse-polarity-proof electrical connection WA: max. 130 mA |
| Surge protection | overvoltage category III |
| Installation position | vertically down |
| Mounting location | The capacitive limit switch can be installed in silos made of different materials (e. g. metal, plastic, concrete). |
| Measured variable | limit level (limit value) |
| Climate class | EN 60068, part 2-38 (test Z/AD) |
| Influence of medium temperature | depending on the filling material |
| Switching time | approx. 0.8 s when covering and uncovering the sensor |
| State of aggregation | solids |
| Solid contents | ≤ ∅ 30 mm |
| Supplementary documentation | technical information (TI) manuals, brief instructions (BA, KA) instruction manuals (SI) |
| Process temperature | -40 ... 80 °C (-40 ... 176 °F) |
| Long-term drift | vertical 6 mm (0.24 inch) |
| Signal on alarm | connection E5: < 100 µA connection WA: relay de-energized |
| Medium pressure limits | -1 ... 6 bar |
| Bulk density | ≤ 200 g/l |
Сравнение
Избранное
