Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 53180 |
| Switching frequency | 6 min full load, 1200 min without load |
| Response time | turn-on time 7 ms , turn-off time 3 ms |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) hazardous area -40 ... 70 °C (-40 ... 158 °F) safe area horizontal DIN rail mounting |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Degree of protection | IP20 |
| Connection | For connection to circuits with safe limited voltage according to IEC 60079-11:2011, type of protection "ic" |
| Mass | 500 g |
| Rated voltage | max. 35 V |
| Input frequency | 0.3 Hz to 1 kHz |
| Electromagnetic compatibility | NE 21 |
| Relative humidity | < 95 % non-condensing |
| Mounting | DIN rail mounting |
| Housing width | see dimensions |
| Housing depth | see dimensions |
| Current | max. 1 A |
| Measurement range | 0 ... 95 % RH |
| Resolution | 0.04 % |
| Transfer rate | 100 MBit/s |
| Housing height | see dimensions |
| Pollution degree | max. 2, according to IEC 60664 |
| Marking | Motherboard MB-FB-GT.AD.FF.IO II 3 G Ex nA nC IIC T4 Gc , Gateway II 3 G Ex nA IIC T4 Gc |
| Protocol | TCP/IP and UDP/IP |
| Output type | common alarm , buzzer |
| Vibration resistance | 1 g , 10 ... 150 Hz |
| Connection type | RJ-45 socket, 8-pin |
| Housing material | Polycarbonate |
| Mechanical life | 1 x 10 switching cycles |
| IECEx approval | IECEx TUN 14.0003X |
| Cable length | max. 30 m |
| Input type | selectable: Pt100 4-wire temperature input , NAMUR/mechanical contact |
| Approved for | Motherboard Ex nA nC IIC T4 Gc , Gateway Ex nA IIC T4 Gc |
| Rated current | 0 mA |
| Contact loading | 250 V AC/ 6 A resistive load |
| Directive 2014/30/EU | EN 61326-1:2013 |
| Shock resistance | 5 g 11 ms |
| Certificate | TÜV 14 ATEX 115980 X |
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 |
| Sensor type | NAMUR sensor according to DIN EN 60947-6 |
| Accuracy | 2 % RH |
| Power dissipation | max. 4.2 W |
| Fault signal | buzzer on |
| Galvanic isolation | IEC 62103 |
| Design / Mounting | Motherboard based |
| Fieldbus type | FOUNDATION Fieldbus |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| Fieldbus standard | IEC 61158-2 |
| LED ERR | red: Hardware fault |
| LED PWR | green: Power on |
| Voltage | max. 35 V |
| All circuits/FE | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Climatic conditions | DIN IEC 721 |
| Termination | integrated |
| Ethernet | IEEE 802.3 |
| Measuring current | 1 mA |
| Directive 73/23/EEC | EN 61010 |
| Line fault detection | lead breakage , short circuit |
| Pulse duration | min. 50 µs |
| Output I, II/other circuits | functional insulation acc. to IEC 62103, rated insulation voltage 250 V |
| Lead resistance | 4.2 Ω per line |
| Ethernet/other circuits | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Physical layer profile | profile type 114 |
| ITK version | 6 |
| Implementation | resource block |
| Firmware update | Ethernet |
| Polarity | polarity-sensitive |
| Port | 100 BASE-TX |
| Services | ICMP , DHCP , AutoIP , HTTP |
| Number of Diagnostic Bus Channels | 2 |
| Number of Diagnostic Modules/Channel | 31 Using Ethernet Interface , 8 Using Fieldbus Interface |
| Cable length/Channel | 30 m |
| LINK/ACT | yellow |
| CH1, CH2 | yellow: diagnostic bus activity |
| Ethernet/Supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Fieldbus/other circuits | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Diagnostic Bus/other circuits | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
Сравнение
Избранное
