Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 28138 |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Degree of protection | IP20 |
| Connection | 9-pin Sub-D socket |
| Mass | 250 g |
| Rated voltage | 19.2 ... 35 V DC |
| Electromagnetic compatibility | NE 21:2011 |
| Relative humidity | < 95 % non-condensing |
| Mounting | motherboard mounting , mounting in any orientation |
| Housing width | 40 mm |
| Housing depth | 128 mm |
| Housing height | 106 mm |
| Pollution degree | max. 2, according to IEC 60664 |
| Marking | II 3 G Ex nA IIC T4 Gc |
| Protocol | PROFIBUS DP V1 |
| Vibration resistance | 1 g , 10 ... 150 Hz |
| Housing material | Polycarbonate |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| LED red | yellow: redundant operation primary device ; yellow 2 Hz flashing: synchronization or redundancy not available |
| Rated current | 160 ... 90 mA |
| Directive 2014/30/EU | EN 61326-1:2013 |
| Shock resistance | 15 g 11 ms |
| Certificate | TÜV 04 ATEX 2500 X |
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 |
| Power dissipation | 3 W |
| Galvanic isolation | IEC 62103 |
| Design / Mounting | Motherboard based |
| LED Seg 1...4 | red 2 Hz flashing: PA error, red and LED DP/ERR red: MAU error |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| FM certificate | FM 19 US 0015 X and FM 19 CA 0011 X |
| FM marking | AEx/Ex ec IIC T4 |
| IECEx certificate | IECEx TUN 13.0038X |
| IECEx marking | Ex nA IIC T4 Gc |
| Marine approval | DNV A-14038 |
| Fieldbus standard | IEC 61158-2 |
| LED PWR | green: Power on |
| All circuits/FE | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Directive 73/23/EEC | EN 50178 (identical to EN 62103) |
| PROFIBUS DP/Supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| LED DP/ERR | red 2 Hz flashing: DP error ; red: Hardware error |
| CH/PROFIBUS DP | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| CH/CH | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
Сравнение
Избранное
