Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 23312 |
| Control elements | DIP-switch |
| Switching frequency | < 10 Hz |
| Response time | 20 ms |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 |
| Connection | SL1: 6b |
| Mass | approx. 140 g |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board |
| Switching point | contact open 0.2 ... 1.2 mA, contact closed 2.1 ... 6.5 mA |
| Connectable sensor types | potential free contact or proximity sensor |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| Relative humidity | 5 ... 90 %, non-condensing up to 35 °C (95 °F) |
| Mounting | on Termination Board |
| Current | 20 mA |
| Marking | II 3G Ex nA nC IIC T4 Gc |
| Output type | open collector transistor (internal fault bus) |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
| Mechanical life | 10 switching cycles |
| Labeling | space for labeling at the front |
| EU-type examination certificate | CESI 02 ATEX 086 |
| IECEx approval | IECEx TUN 04.0012 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Approved for | [Ex ia] IIC |
| Power | 66 mW |
| Rated current | 15 mA at 24 V, relay energized (per channel) |
| Contact loading | 50 V DC / 0.5 A non-inductive |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Certificate | PF 11 CERT 2109 X |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| Safety Integrity Level (SIL) | SIL 2 |
| Display elements | LEDs |
| Power dissipation | 0.35 W at 24 V (per channel) |
| Configuration | via DIP switches |
| Control drawing | 366-005CS-12B (cCSAus) |
| Galvanic isolation | EN 50178:1997 |
| Voltage | 13.2 V |
| Maximum safe voltage | 250 V AC (Attention! U is no rated voltage.) |
| Output | signal: relay SPST per channel, phase selectable |
| Connection side | control side |
| Input | Ex ia, Ex iaD |
| Input/Output | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V |
| Output/Output | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V |
| Line fault detection | breakage 0 ... 0.2 mA, short-circuit 6.5 mA ... maximum value |
| Signal type | Digital Input |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Input/power supply | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V |
| Output/power supply | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V |
| Coding | pin 1 and 2 trimmed For further information see system description. |
| Input/input | safe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V |
Сравнение
Избранное
