Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 84657 |
| Switching frequency | < 3 Hz |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating. |
| Degree of protection | IP20 |
| Connection | SL2: 5a, 7a; 1a, 3a |
| Mass | approx. 100 g |
| Rated voltage | 19 ... 27.6 V loop powered |
| Power consumption | < 1.3 W |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008 |
| Mounting | on Termination Board |
| Test input | see Functional Safety Manual |
| Marking | II 3G Ex nC ec IIC T4 Gc |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Mechanical life | 2 x 10 switching cycles |
| Labeling | space for labeling at the front |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Rated current | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card) |
| Contact loading | 253 V AC/2 A/cos φ 0,7; 30 V DC/2 A resistive load |
| Fuse rating | 3.15 A |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Certificate | PF 17 CERT 4312 X |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010 |
| Safety Integrity Level (SIL) | SIL 3 |
| Display elements | LEDs |
| Power dissipation | < 1.3 W |
| Energized/De-energized delay | 150 ms / 150 ms |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Performance level (PL) | PL e |
| Signal level | 0-signal: -5 ... 5 V 1-signal: 19 ... 27.6 V |
| Connection side | field side |
| Directive 2006/42/EC | EN 62061:2005 , EN/ISO 13849-1:2008 |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 V |
| Output/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 V |
| Signal type | Digital Output |
| Minimum switch current | 10 mA / 24 V DC |
| Coding | no pin trimmed For further information see system description. |
| Test pulse length | max. 4 ms from DO card |
| Pulse/Pause ratio | 150 ms / 150 ms |
Сравнение
Избранное
