Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 42561 |
MTTF | 110 a |
Mission Time (T | 10 a |
Diagnostic Coverage (DC) | 0 % |
Ripple | ≤ 10 % at 30 V DC |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -30 ... 80 °C (-22 ... 176 °F) |
Degree of protection | IP67 |
Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: MSTB AIDA Protective earth: M6 earthing screw Ethernet: RJ-45 AIDA |
Housing | powder coated aluminum |
Mass | approx. 1000 g |
Power consumption | 3.5 W Without read/write heads |
Transfer rate | 10 MBit/s or 100 MBit/s |
Protocol | SMTP HTTP TCP/IP (Port 10000) MODBUS/TCP EtherNet/IP PROFINET IO |
Installation | snap-on to 35 mm standard rail or screw fixing |
Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
Directive 2014/30/EU | EN 61326-1:2013 |
Physical | Ethernet |
Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 V |
Climatic conditions | air humidity max. 96 % |
Current consumption | ≤ 8 A incl. read/write heads |
Rated operating voltage | 20 ... 30 V DC , PELV |
UL File Number | E87056 |
LED PWR/ERR | green: power on red: PROFINET bus failure |
Button | 4 keys: ESC, up, down and return |
Number of read/write heads | max. 4 alternative 2 read/write heads and 2 trigger sensors |
LEDs CH1, CH2, CH3, CH4 | Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
LED Link1/Link2 | green: network connection |
LED Traffic | green: flashes in rhythm with the transmitted data |
LC display | two-line multi-function display with 12 characters per line configuration of the control interface and display of connected read/write heads as additional pictograms; easy and direct selection of operating commands |