Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 89245 |
| Light source | LED |
| Light type | modulated visible red light |
| Ambient light limit | EN 60947-5-2 : 70000 Lux |
| MTTF | 600 a |
| Mission Time (T | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Function indicator | LED yellow: constantly on - background detected (object not detected) constantly off - object detected |
| Control elements | Sensing range adjuster |
| Operating voltage | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching frequency | 500 Hz |
| Response time | 1 ms |
| Product standard | EN 60947-5-2 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) , fixed cable -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP67 / IP69 / IP69K |
| Connection | 300 mm fixed cable with M12 x 1, 4-pin connector |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Mass | approx. 45 g |
| Angle of divergence | approx. 2 ° |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link Revision | 1.1 |
| Min. cycle time | 2.3 ms |
| Process data witdh | Process data input 1 Bit Process data output 2 Bit |
| SIO mode support | yes |
| Device ID | 0x111701 (1120001) |
| Voltage drop | ≤ 1.5 V DC |
| Communication interface | IEC 61131-9 |
| Protection class | III |
| Housing width | 15 mm |
| Housing depth | 41.7 mm |
| Reference target | standard white, 100 mm x 100 mm |
| Diameter of the light spot | approx. 20 mm x 20 mm at a distance of 650 mm |
| Device profile | Identification and diagnosis Smart Sensor type 2.4 |
| Transfer rate | COM 2 (38.4 kBaud) |
| Compatible master port type | A |
| Usage category | DC-12 and DC-13 |
| Housing height | 50.6 mm |
| LED risk group labelling | exempt group |
| Detection range | 10 ... 650 mm |
| Black/White difference (6 %/90 %) | < 6 % at 650 mm |
| Adjustment range | 100 ... 650 mm |
| Cable length | 0.3 m |
| Detection range min. | 10 ... 100 mm |
| Detection range max. | 10 ... 650 mm |
Сравнение
Избранное
