Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 91572 |
| Light source | LED |
| Light type | modulated visible red light |
| Ambient light limit | EN 60947-5-2 : 40000 Lux |
| MTTF | 462 a |
| Mission Time (T | 20 a |
| Diagnostic Coverage (DC) | 60 % |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Control elements | Receiver: sensitivity adjustment |
| Operating voltage | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | Emitter: ≤ 15 mA Receiver: ≤ 15 mA at 24 V Operating voltage |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching frequency | 1000 Hz |
| Response time | 0.5 ms |
| Product standard | EN 60947-5-2 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) , fixed cable -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP67 / IP69 / IP69K |
| Connection | 2 m fixed cable |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Mass | Emitter: approx. 83 g receiver: approx. 83 g |
| Effective detection range | 0 ... 25 m |
| Threshold detection range | 33 m |
| Angle of divergence | approx. 2 ° |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Interface type | IO-Link ( via C/Q = BK ) |
| IO-Link Revision | 1.1 |
| Min. cycle time | 2.3 ms |
| Process data witdh | Emitter: Process data input: 0 bit Process data output: 1 bit Receiver: Process data input: 2 bit Process data output: 2 bit |
| SIO mode support | yes |
| Device ID | Emitter: 0x111411 (1119249) Receiver: 0x111311 (1118993) |
| Test input | emitter deactivation at +U |
| Voltage drop | ≤ 1.5 V DC |
| Communication interface | IEC 61131-9 |
| Protection class | III |
| Housing width | 15 mm |
| Housing depth | 41.7 mm |
| Diameter of the light spot | approx. 850 mm at a distance of 25 m |
| Device profile | Identification and diagnosis Smart Sensor: Receiver: type 2.4 Emitter: - |
| Transfer rate | COM 2 (38.4 kBaud) |
| Compatible master port type | A |
| Usage category | DC-12 and DC-13 |
| Housing height | 61.7 mm |
| LED risk group labelling | exempt group |
| Emitter | OBE25M-R201-S-IO |
| Receiver | OBE25M-R201-2EP-IO |
| Alignment aid | LED red (in receiver lens) illuminated constantly: beam is interrupted, flashes: reaching switching point, off: sufficient stability control |
| Cable length | 2 m |
Сравнение
Избранное
