Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 59518 |
MTTF | 140 a |
Mission Time (T | 20 a |
Diagnostic Coverage (DC) | 0 % |
Operating voltage | 10 ... 30 V DC or 5 V DC ± 5 % (see "Output circuit" in the ordering information) |
No-load supply current | max. 60 mA |
Degree of protection | DIN EN 60529, IP66 DIN EN 60529, IP67 |
Mass | approx. 1300 g (combination 1) approx. 2300 g (combination 2) |
Voltage drop | < 4 V (push-pull, incremental) |
Cable | &Empty; 10.2 mm, Radox 9 x 0.5 mm |
Marking | II 2G Ex db IIC T6 - T4 Gb II 2D Ex tb IIIC T80°C Db |
Output type | push-pull, incremental or RS 422, incremental (see "Output circuit" in the ordering information) |
Vibration resistance | DIN EN 60068-2-6, 10 , 10 ... 2000 Hz |
EU-type examination certificate | ZELM 14 ATEX 0519 X IECEx ZLM 14.0003X |
Pulse count | max. 5000 |
Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected (push-pull, incremental) max. per channel 20 mA , short-circuit protected, reverse polarity protected (RS 422, incremental) |
Output frequency | max. 200 kHz |
Rise time | 250 ns |
De-energized delay | 250 ns |
Climatic testing | DIN EN 60068-2-78 , no moisture condensation |
Emitted interference | EN 61000-6-4:2007/A1:2011 |
Noise immunity | EN 61000-6-2:2005 |
Combination 1 | housing: anodized aluminum flange: anodized aluminum shaft: Stainless steel 1.4401 / AISI 316 |
Combination 2 (Inox) | housing: Stainless steel 1.4401 / AISI 316 flange: Stainless steel 1.4401 / AISI 316 shaft: Stainless steel 1.4401 / AISI 316 |
Rotational speed | max. 6000 min |
Moment of inertia | 400 gcm |
Starting torque | < 5 Ncm |
Axial | 110 N |
Radial | 150 N |
Shock resistance | DIN EN 60068-2-27, 100 , 3 ms |
Directive 2014/34/EU | IEC 60079-0:2011 , EN 60079-0:2012+A11:2013 , IEC 60079-1:2014 , EN 60079-1:2014 , IEC 60079-31:2013 , EN 60079-31:2014 |
L | 1.6 E+9 at 3000 rpm |
Detection type | photoelectric sampling |
Device type | Incremental rotary encoder |
Duty cycle | 1/2 ± 20 % |
Phase position A to B | 90 ° ± 18 ° |
Gas Ex-area | -40 ... 70 °C (-40 ... 158 °F) |
Dust Ex-area | -40 ... 70 °C (-40 ... 158 °F) |