Пт-Пн: 9:00 - 18:00
Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Цены носят информационный характер и не являются публичной офертой. Точную цену и срок поставки подтвердит менеджер при оформлении заявки
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 50612 |
| Mission Time (T | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Operating voltage | 15 ... 30 V |
| Ripple | 10 % |
| No-load supply current | ≤ 1.5 mA |
| Repeat accuracy | 0.3 mm |
| Switching frequency | 0 ... 300 Hz |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) |
| Degree of protection | IP67 |
| Mass | 145 g |
| Time delay before availability | ≤ 40 ms |
| Voltage drop | ≤ 8 V |
| Operating current | 2 ... 25 mA |
| Output type | 2-wire |
| Switching function | Normally open (NO) |
| Rated operating distance | 10 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 8.1 mm |
| B | 25 mm |
| C | 16 mm |
| F | 37 mm |
| Reverse polarity protection | reverse polarity-conductive |
| Short-circuit protection | no |
| Switching state indicator | LED, yellow |
| Connection type | cable PUR , 2 m |
| Housing material | brass, nickel-plated |
| Sensing face | PBT |
| Hysteresis | 0.05 ... 2.2 mm |
| Lowest operating current | 2 mA |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| Core cross-section | 0.25 mm |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 30 mm x 30 mm x 1 mm |
| Reduction factor r | 0.4 |
| Overload resistance | no |
| Wire breakage protection | yes |
| Inductive overvoltage protection | yes |
| Surge suppression | yes |
Сравнение
Избранное
