Пт-Пн: 9:00 - 18:00
Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Цены носят информационный характер и не являются публичной офертой. Точную цену и срок поставки подтвердит менеджер при оформлении заявки
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 44209 |
| Operating voltage | 10 ... 30 V |
| No-load supply current | ≤ 20 mA |
| Switching frequency | 0 ... 200 Hz |
| UL approval | cULus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Degree of protection | IP68 |
| Voltage drop | ≤ 3 V |
| Operating current | 0 ... 200 mA |
| Output type | PNP |
| Switching function | complementary |
| Rated operating distance | 20 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 1 ... 16.2 mm |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Switching state indicator | LED, yellow |
| CSA approval | cCSAus Listed, General Purpose |
| Connection type | terminal compartment |
| Housing material | PBT |
| Sensing face | PBT |
| Hysteresis | typ. 5 % |
| Core cross-section | up to 2.5 mm |
| Operating voltage indicator | LED, green |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Minimum core cross-section | without wire end ferrule 0.5 mm , with connector sleeves 0.34 mm |
| Maximum core cross-section | without wire end ferrule 2.5 mm , with connector sleeves 1.5 mm |
| Reduction factor r | 1 (Minimum distance: 2 mm) |
Сравнение
Избранное
