Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 40208 |
MTTF | 1289 a |
Mission Time (T | 20 a |
Diagnostic Coverage (DC) | 0 % |
Operating voltage | 10 ... 30 V DC |
No-load supply current | ≤ 20 mA |
Switching frequency | 0 ... 440 Hz |
UL approval | cULus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
Degree of protection | IP68 / IP69K |
Mass | 225 g |
Time delay before availability | 80 ms |
Voltage drop | ≤ 2 V |
Note | Tightening torque: 1.8 Nm (housing) |
Operating current | 0 ... 200 mA |
Output type | 3-wire |
Switching function | Normally open (NO) |
Rated operating distance | 20 mm |
Installation | flush |
Output polarity | DC |
Assured operating distance | 0 ... 16.2 mm |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Switching state indicator | LED, yellow |
Connection type | screw terminals |
Housing material | PA/metal with epoxy powder coating |
Sensing face | PA |
Hysteresis | typ. 5 % |
Off-state current | 0 ... 0.5 mA typ. 0.01 mA |
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
Core cross-section | up to 2.5 mm |
EAC conformity | TR CU 020/2011 |
Operating voltage indicator | LED, green |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
Minimum core cross-section | without wire end ferrule 0.5 mm , with connector sleeves 0.34 mm |
Maximum core cross-section | without wire end ferrule 2.5 mm , with connector sleeves 1.5 mm |
Housing base | plastic |
Reduction factor r | 0.41 |