Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Protection Module M-LB-5213

Protection Module M-LB-5213
Protection Module M-LB-5213

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 83579
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • Surge protection for 1 signal line
  • Nominal voltage 1 V DC
  • Protection module for grounded signal lines
  • Max. surge current (8/20 µs) 10 kA
  • Uninterruptable operation (auto reset)
  • Status indication output
  • Mounting on base module, pluggable
  • Up to SIL 3 acc. to IEC 61508
Параметр Значение
Общие характеристики
Артикул 83579
Ambient temperature -40 ... 60 °C (-40 ... 140 °F) Observe the temperature range limited by derating, see section derating.
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Degree of protection IP20
Connection protected area: terminal 4 unprotected area: terminals 1, 3
Mass approx. 20 g
Relative humidity max. 95 % , without condensation
Mounting pluggable in base module for mounting on 35 mm DIN mounting rail
Current ≤ 8 mA
Marking II 3G Ex ec IIC T4 Gc
Dimensions 6.2 x 77 x 79 mm
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Designation system components: - base module with screw terminals M-LB-5000 - base module with spring terminals M-LB-5000.SP - power feed module M-LB-5300 - fault status module M-LB-5400 - maintenance status module M-LB-5500 - universal power rail M-UPR-03-S - place holder module M-LB-5900 - separation wall M-UPR-I
Rated current 500 mA , restrictions see derating characteristics
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Certificate BVS 17 ATEX E 070 X
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-7:2015
Safety Integrity Level (SIL) SIL 3
Display elements LED PWR (power supply), green LED LED FLT (fault signal), red LED LED CHK (maintenance signal), yellow LED
IECEx certificate IECEx BVS 17.0061X
IECEx marking Ex ec IIC T4 Gc
Nominal voltage 1 V DC
Functional safety IEC/EN 61508:2010
Insertion loss ≤ 0.05 dB, at 0 ... 4 kHz, in 600 Ω-System ≤ 3 dB, at 0 ... 350 kHz, in 100 Ω-System
Number of protected signal lines 1
Leakage current < 5 µA x (number of used modules - 1) at 1 V and 25 °C (77 °F) . line-line
Total discharge current (8/20 µs) 10 kA (1x)
Maximum continuous operating voltage 6 V DC
Nominal discharge current (8/20 µs) 5 kA per line (10x)
Voltage protection level max. 22 V line-line for nominal discharge current I max. 31 V line-earth for nominal discharge current I
Topology grounded
Series resistance ≤ 0.6 Ω per line
Impulse rating 1 kV/0.5 kA (category C1) 10 kV/5 kA (category C2) 1 kA (category D1)
Impulse discharge current (10/350 µs) 1 kA per line (2x)
Impulse reset time < 500 ms
Surge protective devices for low voltage EN 61643-21:2001+A1:2009+A2:2013 IEC 61643-21:2001+A1:2008+A2:2012
Rated surge current (8/20 µs) 10 kA per line (1x)
Status indication fault and maintenance signal via Universal Power Rail M-UPR-03-S
Signal lines/fault indication output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Signal lines/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено