Maintenance Status Module M-LB-5500

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 82107

Под заказ

Запрос цены

В избранное Сравнить

Доставка в любой регион России транспортной
компанией на Ваш выбор

Maintenance indication via LEDs
Status indication input
Status indication to control via solid state relay
Mounting on base module, pluggable

Параметр	Значение
Общие характеристики
Артикул	82107
Ambient temperature	-40 ... 60 °C (-40 ... 140 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Degree of protection	IP20
Connection	terminals 3+, 4-; 3-, 4+
Mass	approx. 20 g
Relative humidity	max. 95 % , without condensation
Mounting	pluggable in base module for mounting on 35 mm DIN mounting rail
Marking	II 3G Ex ec IIC T4 Gc
Dimensions	6.2 x 77 x 79 mm
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Designation	system components: - base module with screw terminals M-LB-5000 - base module with spring terminals M-LB-5000.SP - protection module M-LB-XX-52XX - power feed module M-LB-5300 - fault status module M-LB-5400 - maintenance status module M-LB-5500 - universal power rail M-UPR-03-S - separation wall M-UPR-I
Contact loading	30 V AC/0.5 A/cos φ 0.7; 30 V DC/0.5 A resistive load
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Certificate	BVS 17 ATEX E 070 X
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015
Display elements	LED PWR (power supply), green LED LED CHK (maintenance signal), yellow LED
Power dissipation	0.25 W
Output rated operating current	0.5 A
Output voltage	30 V AC/DC
Energized/De-energized delay	< 1 s / < 1 s
IECEx certificate	IECEx BVS 17.0061X
IECEx marking	Ex ec IIC T4 Gc
Nominal voltage	see power feed module M-LB-5300
Connection side	control side
Signal type	Digital Input
Output/power supply	basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Status indication	maintenance signal via solid state relay (NO contact) to the control system