Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 219 |
Ambient temperature | -30 ... 80 °C (-22 ... 176 °F) For usage in hazardous area observe EC-type examination certificate. |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 100 g |
Relative humidity | 5 ... 95 % |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Current | 250 mA |
Marking | II (3)D [Ex ic Dc] IIIC |
Dimensions | 12.5 x 115 x 110 mm (0.5 x 4.5 x 4.3 inch) |
Core cross-section | 2 x 2.5 mm |
Labeling | space for labeling at the front |
EU-type examination certificate | PTB 00 ATEX 2176 X |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Rated current | 250 mA |
Certificate | PF 16 CERT 4065 X |
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 |
Temperature class | T6 for ambient temperature ≤ 50 °C T5 for ambient temperature ≤ 70 °C T4 for ambient temperature ≤ 80 °C |
Control drawing | 116-0187 (cCSAus) |
IECEx certificate | IECEx BAS 14.0010X |
Voltage | 30 V |
Nominal voltage | 24 V DC |
Internal capacitance | negligible |
Internal inductance | 200 µH |
Insertion loss | ≤ 0.05 dB, at 0 ... 4 kHz, in 600 Ω-System ≤ 3 dB, at 0 ... 174 kHz, in 100 Ω-System |
Number of protected signal lines | 4 |
Leakage current | < 5 µA at 24 V and 25 °C (77 °F) , line-line |
Total discharge current (8/20 µs) | 20 kA (1x) |
Maximum continuous operating voltage | 30 V DC |
Nominal discharge current (8/20 µs) | 5 kA per line (10x) |
Voltage protection level | max. 75 V line-line for nominal discharge current I max. 1.2 kV line-earth for nominal discharge current I |
Mounting location | indoor |
Topology | non-grounded |
Series resistance | < 0.5 Ω per line |
Impulse rating | 10 kV/5 kA (category C2) 2 kV/2 kA (category D1) |
Impulse discharge current (10/350 µs) | 2 kA per line (2x) |
Impulse reset time | < 30 ms |
Surge protective devices for low voltage | EN 61643-21:2001+A1:2009+A2:2013 IEC 61643-21:2001+A1:2008+A2:2012 |
Rated surge current (8/20 µs) | 10 kA per line (1x) |