Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Com Unit for FOUNDATION Fieldbus Modular I/O LB8110*

Com Unit for FOUNDATION Fieldbus Modular I/O LB8110*
Com Unit for FOUNDATION Fieldbus Modular I/O LB8110*

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 40024
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • Interface between the I/O modules and the PCS/PLC
  • Com unit for 20 analog or 40 digital channels
  • Communication via FOUNDATION Fieldbus H1
  • Mounting in Zone 2, Class I/Div.2 or in the safe area
  • HART communication via service bus
  • Configured via the process control system
  • Non-volatile memory for configuration and parameter settings
  • Quick communication set-up
  • Permanently self-monitoring
  • Outputs drive to safe state in case of failures
  • Supports multichannel I/O modules
  • Module can be exchanged under voltage
Параметр Значение
Общие характеристики
Артикул 40024
UL approval E106378
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Storage temperature -25 ... 85 °C (-13 ... 185 °F)
Degree of protection IP20 (module) , mounted on backplane
Connection via backplane
Mass approx. 150 g
Rated voltage 5 V DC , only in connection with the power supplies LB9***
Power consumption 2 W
Electromagnetic compatibility NE 21
Marking II 3 G Ex nA IIC T4 Gc
Protocol H1 to IEC 1158-2
Vibration resistance frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Dimensions 32.5 x 100 x 102 mm (1.28 x 3.9 x 4 inch)
LED indicator LED 1 (power supply): On = operating, fast flash = cold start LED 2 (collective alarm): On = internal fault, flashing = no fieldbus LED 3 (operating mode): Flashing = active
IECEx approval BVS 09.0037X
EAC approval Russia: RU C-IT.MIII06.B.00129
Approved for Ex nA IIC T4 Gc
Directive 2014/30/EU EN 61326-1
Shock resistance shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Certificate PF 08 CERT 1234 X
Directive 2014/34/EU EN 60079-0:2009 EN 60079-11:2007 EN 60079-15:2010
Control drawing 116-0321
Fieldbus type FOUNDATION Fieldbus H1
ATEX approval PF 08 CERT 1234 X
Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Baud rate 31.25 kBit/s , MBP
Lloyd Register 15/20021
Bureau Veritas Marine 22449/B0 BV
American Bureau of Shipping T1450280/UN
DNV GL Marine TAA0000034
Number of stations per bus line 1 or 2, depending on the required response times
Supported I/O modules 5 slots, to be filled with (combinations possible): 1*08 digital input, 8-channel, NAMUR 3*05 analog input, 4-channel, 20 mA (HART via service bus) 4*05 analog output, 4-channel, 20 mA (HART via service bus) 5*04 Pt100 RTD input, 4-channel 5*05 thermocouple input, 4-channel 6005 relay output, 4-channel, 230 V 6006 relay output, 8-channel, 24 V 6*08 digital output, 8-channel, Ex i 6*10-6*15 digital output, 4-channel, Ex i power * = variable (0=non-IS, 1=IS)
Bus length max. 1900 m (must not be exceeded by the sum of all trunk and spur lines)
Addressing via PCS (software)
Station connection directly at the trunk or via spur protector
Number of channels per station max. 20 analog, max. 40 digital
Auxiliary energy 24 V DC Trunk load 20 mA
Spur length max. 120 m (depending on the number of field devices. Modular I/O station = 1 field device)

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено