Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Com Unit for MODBUS TCP FB8211B2-0756

Com Unit for MODBUS TCP FB8211B2-0756
Com Unit for MODBUS TCP FB8211B2-0756

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 83243
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • Interface between the I/O modules and the PCS/PLC
  • Com unit for 80 analog or 184 digital channels
  • Communication via MODBUS TCP
  • Installation in suitable enclosures in Zone 1
  • Module can be exchanged under voltage (hot swap)
  • HART communication via MODBUS TCP
  • Configuration via FDT 1.2 DTM
  • Non-volatile memory for configuration and parameter settings
  • Self configuration in redundant systems
  • Permanently self-monitoring
  • Outputs drive to safe state in case of failures
Параметр Значение
Общие характеристики
Артикул 83243
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Storage temperature -25 ... 85 °C (-13 ... 185 °F)
Degree of protection IP20 (module) , a separate housing is required acc. to the system description
Connection via backplane
Mass approx. 750 g
Rated voltage 5 V DC , only in connection with the power supplies FB92**
Power consumption 2.5 W
Electromagnetic compatibility NE 21
Relative humidity 95 % non-condensing
Transfer rate 10 MBit/s
Marking II 2 G Ex d [ib] IIC Gb
Vibration resistance frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance
Dimensions 57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)
Connection type wired to Ex e terminals via backplane
EU-type examination certificate PTB 97 ATEX 1074 U
Supplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
EAC approval Russia: RU C-IT.MIII06.B.00129
System information The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
LED indication LED green (power supply): On = operating, fast flash = cold start LED red (collective alarm): On = internal fault, flashing = no Modbus TCP connection LED yellow (operating mode): flashing 1 (1:1 ratio) = active, normal operation; flashing 2 (7:1 ratio) = active, simulation
Directive 2014/30/EU EN 61326-1
Shock resistance shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
Directive 2014/34/EU EN 60079-0:2009 EN 60079-1:2007 EN 60079-11:2007 EN 60079-26:2007 EN 61241-11:2006
Power dissipation 2 W
Fieldbus type MODBUS TCP
Fieldbus standard IEEE 802.3
Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
HART communication via Ethernet
Environmental test EN 60068-2-14
Lloyd Register 15/20021
American Bureau of Shipping T1450280/UN
DNV GL Marine TAA0000034
Supported I/O modules all FB remote I/O modules
Bus length max. 100 m (Ethernet standard)
Addressing IP address assigned via Ethernet
Redundancy via left front connector
Station connection directly to PCS or PLC or via hubs or switches
Ethernet address IP V4 address (factory standard setting: 0.0.0.0, auto IP, DHCP)
Number of channels per station max. 80 analog, max. 184 digital

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено