Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 97801 |
Материал | body and cap 6061T6 aluminum body: 6061T6 aluminum, cap: AISI 316 (1.4401) stainless steel 304 stainless steel |
Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
Storage temperature | -40 ... 80 °C (-40 ... 176 °F) |
Degree of protection | EPV-7500....-01/02/04: mounting only Type 4X / IP66 EPV-7500....-03: Mounting and unit Type 4X / IP66 |
Housing | EPV-7500-AA... body and cap 6061T6 aluminum body and cap: 6061T6 aluminum EPV-7500-SS... body: 6061T6 aluminum, cap: AISI 316L (1.4404) stainless steel |
Mass | approx. 1005 g (2.2 lb) |
Relative humidity | 5 ... 90 %, non-condensing |
Mounting | EPV-7500-...-01/02/03: mounting hole 1.5 in NPT knockout (50.8 mm) hole sealing nut (provided) EPV-7500-AA-04: mounting hole 37 mm with sealing nut (provided) |
Marking | II 3 G II 3 D part of 18ATEX2025X |
Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s , all axes |
Dimensions | 127 x 94 x 69 mm (5 x 3.7 x 2.7 in) |
Installation | - any orientation to enclosure - not gravity dependent - internal and external mounting possible |
IECEx approval | part of IECEx UL 18.0022X |
Series | 7500 |
Hazardous environment | gas or dust |
Protective gas supply | compressed air or inert gas, 5 µm filter, free from oil |
Purge flow rate | See tables |
Flow rate for leakage compensation | EPV-7500....-01: approx. 25 scfh (707 l/hr) at 0.25 in wc (0.63 mbar) approx. 65 scfh (1838 l/hr) at 0.75 in wc (1.9 mbar) EPV-7500....-02: approx. 20 scfh (565 l/hr) at 0.25 in wc (0.63 mbar) approx. 48 scfh (1357 l/hr) at 0.75 in wc (1.9 mbar) EPV-7500....-03 and EPV-7500-AA-04: approx. 15 scfh (424 l/hr) at 0.25 in wc (0.63 mbar) approx. 25 scfh (707 l/hr) @ 0.75 in wc (1.9 mbar) |
Breaking pressure | EPV-7500....-01: 0.8 in wc (2.0 mbar) EPV-7500-...-02: 1.4 in wc (3.5 mbar) EPV-7500-...-03: 1.5 in wc (3.8 mbar) EPV-7500-AA-04: 1.4 in wc (3.5 mbar) |
Impact resistance | 30 g, 11 ms, all axes |
Spark arrestor | AISI 316L (1.4404) stainless steel |
cULus | Class I, Division 2, Groups A, B, C, D T4 (-40 °C ≤ Ta ≤ 70 °C) Class I, Division 2, Groups A, B, C, D, T6 (-40 °C ≤ Ta ≤ 50 °C) Class II, Division 2, Groups F, G T4 (-40 °C ≤ Ta ≤ 70 °C) Class II, Division 2, Groups F, G T6 (-40 °C ≤ Ta ≤ 50 °C) |
Maximum pressure | See tables |
Directive 2014/30/EU | EN 61326-1:2013 , FCC CFR 47, part 15, subpart B: 2017, Class A ICES-003, Issue 6:2016, Class A ITE |
Directive 2011/65/EU (RoHS) | EN 50581:2012 |
Directive 2014/34/EU | IEC/EN 60079-0 , IEC/EN 60079-2 , IEC/EN 60079-7 , IEC/EN 60079-15 , IEC/EN 60079-31 Supplements: EN 61010-1:2010, EN 61326-3-2:2008, EN 61000-6-2:2005 |
Equipment architecture | max. enclosure size 450 ft (12.7 m ) |