Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Segment Protector for Cabinet Installation R2-SP-IC*

Segment Protector for Cabinet Installation R2-SP-IC*
Segment Protector for Cabinet Installation R2-SP-IC*

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 54334
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • 4 ... 12 outputs Ex ic (FISCO or Entity) or non-incendive (Div 2)
  • Advanced fault isolation at the spur
  • Segment Protector in Zone 2/Div. 2
  • Instruments in Zone 2/Div. 2 or Zone 1/Div. 1
  • For FOUNDATION Fieldbus H1 and PROFIBUS PA
  • Advanced Diagnostics at the spur
  • Power, Com, Diagnostics, and Error LEDs
  • T-connector for easy installation and maintenance
  • Test points for easy troubleshooting
Параметр Значение
Общие характеристики
Артикул 54334
UL approval E106378
Ambient temperature -50 ... 70 °C (-58 ... 158 °F)
Storage temperature -50 ... 85 °C (-58 ... 185 °F)
Degree of protection IP20
Mass see table "Technical data depending on model"
Rated voltage max. 31 V
Electromagnetic compatibility NE 21:2011
Relative humidity < 95 % non-condensing
Mounting DIN rail mounting
Current 46 mA switch 1, position 1 65 mA switch 1, position 2
Marking II 3 G Ex nA [ic] IIC T4 Gc II (3 D) [Ex ic Dc] IIIC
Vibration resistance 1 g , 10 ... 150 Hz
Dimensions see table "Technical data depending on model"
Connection type pluggable , screw terminal or spring terminal
Housing material Polycarbonate
Core cross-section see table 2
EU-type examination certificate TÜV 12 ATEX 098651 X
IECEx approval IECEx TUN 12.0015X
Supplementary information Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Approved for Ex nA [ic] IIC T4 Gc [Ex ic Dc] IIIC
Rated current max. 32 mA switch 1, position 1 max. 43 mA switch 1, position 2
Directive 2014/30/EU EN 61326-1:2013
Shock resistance 15 g 11 ms
Directive 2014/34/EU EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
Control drawing 116-0406
Design / Mounting Cabinet installation
Corrosion resistance acc. to ISA-S71.04-1985, severity level G3
Marine approval DNV A-14038
Terminating resistor external type M-FT 100 Ω +/- 10 %
Fieldbus standard IEC 61158-2
Short-circuit current 46 mA switch 1, position 1 57 mA switch 1, position 2
LED PWR green: Fieldbus voltage > 10 V and fieldbus terminator is deactivated
Voltage 32 V
Climatic conditions IEC 60721
Maximum safe voltage 35 V
Surge protection Trunk overvoltage protection if voltage exceeds typ. 39 V, max. 41 V
Switch configuration of short-circuit current/rated current
Inductance 0.125 mH switch 1, position 1 0.25 mH switch 1, position 2
Capacitance 60 nF
Number of outputs see table "Technical data depending on model"
Number of devices per output 1
Self current consumption see table "Technical data depending on model"
Voltage drop main cable/outputs max. 1.2 V
Voltage drop trunk In/Out 0 V
LED COM/ERR yellow: flashing: fieldbus communication status and physical layer diagnostic status
LED SPURS red: 2 Hz flashing in short-circuit condition

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено