Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 27751 |
Control elements | DIP-switch |
Ripple | ≤ 10 % |
Switching frequency | ≤ 5 kHz |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 150 g |
Rated voltage | 20 ... 30 V DC |
Electromagnetic compatibility | NE 21:2004 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Marking | II 3G Ex nA II T4 |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
Labeling | space for labeling at the front |
EU-type examination certificate | DMT 01 ATEX E 133 |
IECEx approval | IECEx PTB 05.0011 |
Approved for | [Ex ia] IIC , [Ex ia] I , [Ex ia] IIIC |
Rated current | ≤ 50 mA |
Output I | signal, passive electronic output |
Output II | signal or error message; passive transistor output |
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Certificate | TÜV 99 ATEX 1499 X |
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 50303:2000 |
Safety Integrity Level (SIL) | SIL 2 |
Display elements | LEDs |
Configuration | via DIP switches |
Control drawing | 116-0047 |
Galvanic isolation | IEC 62103:2003 |
Signal level | 1-signal: switching voltage - 2.5 V max. at 10 mA switching current or 3 V max. at 100 mA switching current 0-signal: switched off (off-state current ≤ 10 µA) |
Connection side | control side |
Line fault detection | breakage I ≤ 0.1 mA , short-circuit I > 6 mA |
Signal type | Digital Input |
Rated values | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data |
Open circuit voltage/short-circuit current | approx. 8 V DC / approx. 8 mA |
Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
Collective error message | Power Rail |