Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 44498 |
| Ripple | within the supply tolerance |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Rated voltage | 20 ... 35 V DC |
| Power consumption | 1.3 W |
| Electromagnetic compatibility | NE 21:2006 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Voltage drop | approx. 4 V or internal resistance 200 Ω at 20 mA |
| Current | 93 mA |
| Marking | II 3G Ex nA II T4 [device in zone 2] |
| Dimensions | 20 x 115 x 115 mm (0.8 x 4.5 x 4.5 inch) , housing type B1 |
| Labeling | space for labeling at the front |
| EU-type examination certificate | BAS 00 ATEX 7215 |
| IECEx approval | IECEx BAS 16.0045 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Rise time | < 100 µs at bounce from 10 ... 90 % |
| Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Power | 0.58 W |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Certificate | TÜV 99 ATEX 1499 X |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| Safety Integrity Level (SIL) | SIL 2 |
| Display elements | LEDs |
| Accuracy | 0.1 % |
| Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03) |
| Power dissipation | 1.1 W at 20 mA into 10 V (equivalent to 500 Ω) load |
| Control drawing | 116-0173 (cULus) |
| Insulation coordination | EN 50178:1997 |
| Galvanic isolation | EN 50178:1997 |
| Voltage | 25.2 V |
| Maximum safe voltage | 250 V (Attention! The rated voltage can be lower.) |
| Output | Ex ia IIC, Ex iaD |
| Connection side | field side |
| Load | 100 ... 700 Ω |
| Input resistance | > 100 kΩ, when wiring resistance in the field < 50 Ω or > 800 Ω at 20 mA |
| Input/Output | safe electrical isolation acc. to EN 60079-11, voltage peak value 375 V |
| Signal type | Analog output |
| Input/power supply | basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC |
| Output/power supply | safe electrical isolation acc. to EN 60079-11, voltage peak value 375 V |
| Influence of ambient temperature | ≤ ± 20 ppm/K |
| After calibration | at 20 °C (68 °F): ≤ ± 0.1 % incl. non-linearity and hysteresis |
Сравнение
Избранное
