Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Termination Board HiDTB16-TRI-DIISQ-EL-SC

Termination Board HiDTB16-TRI-DIISQ-EL-SC
Termination Board HiDTB16-TRI-DIISQ-EL-SC

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 43207
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • System board for Triconex
  • For 64-channel (32+32) DI card 3564
  • For 16 modules
  • Recommended module: HiD2844 (DI)
  • 24 V DC supply
  • Hazardous area: screw terminals, blue
  • Safe area: ELCO socket, 56-pin
Параметр Значение
Общие характеристики
Артикул 43207
Материал housing: polycarbonate, 30 % glass fiber reinforced
Ripple ≤ 10 %
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Degree of protection IP20
Connection hazardous area connection (field side): screw terminals, blue safe area connection (control side): ELCO socket, 56-pin
Mass approx. 600 g
Rated voltage 24 V DC , in consideration of rated voltage of used isolated barriers
Fusing 2 A , in each case for 8 modules
Electromagnetic compatibility NE 21:2011 For further information see system description.
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Voltage drop 0.9 V , voltage drop across the series diode on the termination board must be considered
Dimensions 300 x 200 x 163 mm (11.8 x 7.9 x 6.42 inch) , height including module assembly
Reverse polarity protection yes
IECEx approval IECEx CES 11.0022
EC-Type Examination Certificate CESI 11 ATEX 062
Approved for [Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I
Group, category, type of protection II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
Supply Redundancy available. The supply for the modules is decoupled, monitored and fused.
Display elements LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED
Power dissipation ≤ 500 mW , without modules
Configuration jumper SW1/SW2: card selection - position 1: DI card 3564 - position 2: n.c. (factory setting) - position 3: DI card 3504E
Control drawing see control drawing of correspoding modules
Maximum safe voltage 250 V (Attention! U is no rated voltage.)
Field circuit/control circuit safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено