Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 92476 |
Control elements | DIP-switch |
Ripple | 20 mV |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Degree of protection | IP20 |
Connection | SL1: 8a(+), 7a(-) |
Mass | approx. 100 g |
Rated voltage | 19 ... 30 V DC bus powered via Termination Board |
Power consumption | ≤ 1.1 W |
Deviation | at 20 °C (68 °F) ≤ ± 0.1 % incl. non-linearity and hysteresis (source mode 4 ... 20 mA) ≤ ± 0.2 % incl. non-linearity and hysteresis (sink mode 4 ... 20 mA) ≤ ± 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V) |
Electromagnetic compatibility | NE 21:2006 For further information see system description. |
Mounting | on Termination Board |
Current | 100 mA |
Marking | II 3G Ex ec IIC T4 Gc |
Output signal | 4 ... 20 mA or 1 ... 5 V (on 250 Ω, 0.1 % internal shunt) 4 ... 20 mA (sink mode), operating voltage 15 ... 26 V |
Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
Labeling | space for labeling at the front |
EU-type examination certificate | CESI 06 ATEX 017 |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Power | 630 mW |
Rated current | ≤ 45 mA |
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Certificate | KIWA 15 ATEX 0035 X |
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018 , EN 50303:2000 |
Safety Integrity Level (SIL) | SIL 2 |
Display elements | LED |
Power dissipation | ≤ 800 mW |
Configuration | via DIP switches |
Control drawing | 16-534FM-12 (cFMus) |
IECEx certificate | IECEx CES 06.0002 IECEx KIWA 15.0017X |
IECEx marking | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex ec IIC T4 Gc |
Voltage | 25.2 V |
Maximum safe voltage | 250 V AC (Attention! U is no rated voltage.) |
Connection side | control side |
Input | Ex ia |
Load | 0 ... 300 Ω (source mode) |
Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
Signal type | Analog input |
Frequency range | field side into the control side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB) |
Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
Output/power supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
Influence of ambient temperature | < 2 µA/K (0 ... 60 °C (32 ... 140 °F)); < 4 µA/K (-20 ... 0 °C (-4 ... 32 °F)) |
Coding | pin 1 and 3 trimmed For further information see system description. |
Internal capacitance | 5.7 nF |
Internal inductance | negligible |
Input signal | 4 ... 20 mA limited to approx. 30 mA |
Available voltage | ≥ 15 V at 20 mA on SL2: 5a(+), 5b(-) |
Equipment | SL2: 5a(+), 5b(-) |
Settling time | ≤ 200 ms |
Rise time/fall time | ≤ 20 ms |