Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 44773 |
| Control elements | DIP-switch |
| Ripple | within the supply tolerance |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection | IP20 |
| Connection | SL1: 8a(+), 10a(+), 7a(-), 9a(-) |
| Mass | approx. 100 g |
| Rated voltage | 20 ... 30 V DC bus powered via Termination Board |
| Power consumption | 0.35 W (24 V and 1 mA sense current) |
| Deviation | I ≥ 1 mA: ±0.1 % of R or ± 0.1 Ω (the larger value is applicable) I < 1 mA: accuracy reduces in proportion to I . e. g. I = 0.1 mA: ± 1 % of R or 1 Ω (the larger value is applicable). |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| Mounting | on Termination Board |
| Current | 17.4 mA |
| Marking | II 3G Ex nA II T4 |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Labeling | space for labeling at the front |
| EU-type examination certificate | BASEEFA 10 ATEX 0263X |
| IECEx approval | IECEx BAS 10.0122X IECEx BAS 10.0123X |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Rise time | signal response time ≤ 2 ms (10 ... 90 %) response to application of I : R > 50 Ω and I < 5mA: < 5ms response to application of I : R > 30 Ω and I < 5mA: < 10ms response to application of I : R > 18 Ω and I < 5mA: < 20ms |
| Approved for | [Zone 0] [Ex ia] IIC, [Ex iaD], [Ex ia] I Ex nA II T4 |
| Power | 54 mW |
| Rated current | < 20 mA |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Certificate | BASEEFA 10 ATEX 0264X |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| Display elements | LED |
| Accuracy | < ± 0.1 % of full-scale value |
| Fault signal | < 18 Ω or > 400 Ω, depending on lead disconnected (measuring current ≤ 1mA) |
| Configuration | via DIP switches |
| Control drawing | 116-0333 (cULus) |
| Voltage | 12.4 V |
| Maximum safe voltage | 253 V (Attention! The rated voltage can be lower.) |
| Connection side | control side |
| Input/Output | safe galvanic isolation acc. to IEC 60079-11, voltage peak value 375 V |
| Line fault detection | 8 nA |
| Signal type | Analog input |
| Input/power supply | safe galvanic isolation acc. to IEC 60079-11, voltage peak value 375 V |
| Output/power supply | functional insulation, rated insulation voltage 50 V AC |
| Influence of ambient temperature | I ≥ 1 mA, R ≥ 100 Ω : 0.01 %/K in the range -20 ... +60 °C (253 ... 333 K) I < 1 mA or R < 100 Ω: temperature stability reduces in proportion to I or R |
| Protection against electrical shock | UL 61010-1 |
| Coding | pin 1, 3 and 4 trimmed For further information see system description. |
| Lead resistance | ≤ 10 % of resistance value |
| Available voltage | 0 ... 4.2 V |
| Transmission range | 0 ... 10 mA |
Сравнение
Избранное
