Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Read/write head IQH1-F61-V1

Read/write head IQH1-F61-V1
Read/write head IQH1-F61-V1

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 39396
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • Operating frequency 13.56 MHz
  • Conforms to ISO 15693
  • Suitable for FRAM transponder
  • Particularly flat construction
  • Connection cable with V1 plug (M12 x 1)
  • Degree of protection IP67
  • Can be mounted on metal
  • For connection to IDENTControl control interface
Параметр Значение
Общие характеристики
Артикул 39396
MTTF 770 a
Mission Time (T 10 a
Diagnostic Coverage (DC) 0 %
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Degree of protection IP67
Connection connector M12 x 1
Housing ABS
Mass approx. 60 g
Power consumption ≤ 1.3 W
Electromagnetic compatibility EN 61000-6-2, EN 61000-6-4
Transfer rate 26 kBit/s
Cable length 20 cm
Width max. 45 mm
Supply from the IDENTControl
UL File Number E87056
Read distance 0 ... 55 mm
Operating frequency 13.56 MHz
RFID ISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC 18000-3
Encapsulation compound WEVO 403FL/300
Write distance 0 ... 55 mm
Distance between two heads Multiplex on: ≥ 100 mm Multiplex off: ≥ 150 mm
R&TTE Directive 1995/5/EC EN 301489-1 V1.8.1 (2008-04), EN 301489-3 V1.4.1 (2002-08), EN 300330-2 V1.3.1 (2006-04), EN 60950-1:2006
FCC approval This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approval This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Radio approval USA: FCC IREIQH1-F61-V1 Canada: 7037A-IQH1F61V1

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено