Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 58512 |
| Operating voltage | 20 ... 30 V DC , ripple 10 % ; 12 ... 20 V DC sensitivity reduced to 90 % |
| No-load supply current | ≤ 20 mA |
| Repeat accuracy | ± 1 mm |
| Switching frequency | 10 Hz |
| UL approval | cULus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Degree of protection | IP67 |
| Housing | Polycarbonate |
| Mass | 10 g |
| Time delay before availability | ≤ 150 ms |
| Voltage drop | ≤ 2 V |
| Pulse length | ≥ 3 s |
| Temperature influence | + 0.17 %/K |
| Output type | 1 switch output PNP, NO |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm |
| Connection type | M8 x 1 connector , 4-pin |
| Off-state current | ≤ 0.01 mA |
| Standards | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
| LED yellow | switching state and flashing: Teach-In |
| Adjustment range | 30 ... 100 mm |
| Sensing range | 10 ... 100 mm |
| Tightening torque, fastening screws | max. 0.2 Nm |
| Dead band | 0 ... 10 mm |
| Standard target plate | 20 mm x 20 mm |
| Transducer frequency | approx. 400 kHz |
| Input type | 1 program input |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Range hysteresis | typ. 2.5 mm |
| Switch-on delay | ≤ 50 ms |
| Shock resistance | 30 g , 11 ms period |
| Rated operating voltage | 24 V DC |
| Permissible cable length | max. 300 m |
| Level | low level : 0 ... 0.7 V (Teach-In active) high level : U or open input (Teach-In inactive) |
| Input impedance | 16 kΩ |
| Installation position | any position |
Сравнение
Избранное
