Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Read head WCS3B-LS1**

Read head WCS3B-LS1**
Read head WCS3B-LS1**

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 37628
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • RS-485 interface
  • Non-contact, absolute position encoder
  • Automatic detection of dirt accumulation
  • Output of position and speed
Параметр Значение
Общие характеристики
Артикул 37628
Operating voltage 10 ... 30 V DC
Switching voltage Operating voltage
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Degree of protection IP54
Housing ABS , PC (Polycarbonate)
Mass 500 g
Power consumption 2 VA with Option H, heating: 11 VA at 24 V DC
Relative humidity 90 % , noncondensing
Operation indicator LED green: power on
Interface type RS 485 interface
Resolution ± 0.4 mm (1,250 positions/m)
Transfer rate Baud rate 19.2 kBit/s ... 187.5 kBit/s (to be specified with order)
Data flow indicator LED yellow: data communication active
Vibration resistance DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles
CSA approval cCSAus Certified, General Purpose Class 2 power source
Connection type 5-pin, M12 x 1 connector
Ordering information Mounting plate included with delivery
Emitted interference DIN EN 61000-6-4 , DIN EN 12015
Noise immunity DIN EN 61000-6-2 , DIN EN 12016
Shock resistance DIN EN 60068-2-27, half sine 30 g, 18 ms
Operating temperature 0 ... 60 °C (32 ... 140 °F) with Option H, heating: -40 ... 60 °C (-40 ... 140 °F)
Error indicator LED red flashing: read head outside of code rail solid on: internal diagnostic test failed
Termination without RS 485 termination
Data output code binary code
Measuring range max. 314.5 m
Passage speed ≤ 12.5 m/s
Display Display module, 6-digit (only with option D, display) adaptable to installation position
Free tolerances to code rail horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm )
Output velocity switch output , short-circuit protected (only with Option S, speed output)
Velocity indicator LED yellow (only with Option S, speed output) off, if speed limit is exceeded (instead of data flow display)

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено