Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 60015 |
| MTTF | 105 a at 30 °C |
| UL approval | An isolated source with a secondary open circuit voltage of ≤ 30 V with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Degree of protection | IP20 |
| Mass | approx. 460 g |
| Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2007 |
| Construction type | Low profile housing , Stainless steel |
| Interface type | Chip card slot |
| Transfer rate | 10 MBit/s / 100 MBit/s , Automatic baud rate detection |
| Protocol | Media Redundancy Protocol (MRP) |
| Standards | EN 61000-6-2:2005, EN 61000-6-4:2007 |
| Rated operating current | ≤ 200 mA from AS-Interface |
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 |
| Shock resistance | EN 61131-2:2004 |
| Physical | 2 x RJ-45 |
| Rated operating voltage | from AS-Interface |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
| AS-Interface specification | V3.0 |
| PLC-Functionality | activateable |
| Earth fault detection | integrated |
| EMC monitoring | integrated |
| Diagnostics function | Extended function via display |
| Display | Illuminated graphical LC display for addressing and error messages |
| LED ETHERNET | ethernet active; LED green |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| LED CONFIG ERR | configuration error; LED red |
| LED PRG ENABLE | autom. programming; LED green |
| LED POWER | voltage ON; LED green |
| LED PRJ MODE | projecting mode active; LED yellow |
| LED U AS-i | AS-Interface voltage; LED green |
| Insulation voltage | ≥ 500 V |
| AS-Interface | EN 62026-2:2013 |
| Switch SET | Selection and setting of a slave address |
| OK button | Mode selection traditional-graphical/confirmation |
| Button MODE | Mode selection PRJ-operation/save configuration/cursor |
| ESC button | Mode selection traditional-graphical/cancel |
| PROFINET | RJ-45 |
Сравнение
Избранное
