Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

AS-Interface Safety Monitor VAS-2A-K12-S1

AS-Interface Safety Monitor VAS-2A-K12-S1
AS-Interface Safety Monitor VAS-2A-K12-S1

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 26612
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • Two dependent or independent open circuits
  • Fulfills technical safety requirements for Category 4 according to EN 954-1, EN 61508, SIL 3 and Performance Level e (PLe)
  • Logic configuration by means of drag & drop with diagrammatical display on the PC
  • Extended logic functions
Параметр Значение
Общие характеристики
Артикул 26612
MTTF 389 a
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Storage temperature -30 ... 70 °C (-22 ... 158 °F)
Degree of protection IP20 (only for use in electrical operating rooms / switch cabinet suitable with minimum protection type IP54)
Connection screw terminals
Housing Polyamide PA 66 , black
Mass 450 g
Mounting DIN rail mounting
Interface type RS 232, serial
Transfer rate 9600 baud, no parity, 1 start bit, 1 stop bit, 8 data bits
Output type Signal output: PNP transistor output, 200 mA, short-circuit and reverse-polarity-proof
B 2 E+5
Standards NFPA 79:2002
LED green Off: contacts of the safety output (OSSD) open constantly lit: contacts of the safety output (OSSD) closed flashing: delay time running for Stop Category 1
LED yellow off: - constantly lit: startup/restart lock active flashing: external test required
Response delay < 50 ms
LED red Off: contacts of the safety output (OSSD) closed constantly lit: contacts of the safety output (OSSD) open flashing: error
Rated operating current ≤ 200 mA ≤ 45 mA from AS-Interface
Switch-on delay < 10 s
Directive 2014/30/EU EN 62026-2:2013 EN 61000-6-2:2006, EN 61000-6-4:2007
Safety Integrity Level (SIL) SIL 3
Rated operating voltage 24 V DC ± 15 % Residual ripple ≤ 15 % 26.5 ... 31.6 V from AS-Interface
Number/Type 2 opto-coupling inputs (high-active) "Start" and "protection control (EDM)", input currents about 10 mA at 24 V DC
Performance level (PL) PL e
Functional safety ISO 13849-1:2008 (up to category 4/PL e), IEC 61508:2000/IEC 62061:2005 (up to SIL3)
Surge protection overvoltage category III for rated operating voltage 300 V DC acc. to VDE 0110 Part 1
Safety output 2 x 2 potential-free NO contacts, max. contact loading: 1 A DC-13 at 24 V DC, 3 A AC-15 at 230 V AC
Electrical safety EN 50178:1998
AS-Interface specification V2.1
LED POWER from: no power supply green, continuous illuminated: AS-Interface power supply available
AS-Interface EN 62026-2:2013
Directive 2006/42/EC EN 954-1:1996, EN 61496:2005, EN 60204-1:2006
LED AS-i from: normal operation red, continuous illuminated: communication error
Directive 2006/95/EC EN 60947-5-1:2005

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено