Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 95440 |
UL approval | Protection class IP20 is not included in the UL approval. The protection class is tested by Pepperl+Fuchs. |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Degree of protection | IP20 according to EN 60529 |
Connection | 200 mm, PVC cable 0.5 mm |
Housing | Polyamide hot-melt adhesive |
Mass | 31 g |
Relative humidity | 85 % , noncondensing |
Altitude | ≤ 5000 m above MSL |
Protection class | III |
Current | ≤ 100 mA per output, ≤ 100 mA total |
Note | This device is maintenance-free. If the device is used in a manner not specified by the manufaturer, the protection provided by the device may be impaired. |
Pollution degree | 2 |
Contacts | open conductor ends with connector sleeves |
Vibration resistance | 0.35 mm 10 ... 57 Hz , 5 g 57 ... 2000 Hz, 10 cycles |
Rated insulation voltage | 32 V |
Shock and impact resistance | 30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks |
Rated operating current | ≤ 40 mA (without inputs/outputs)/max. 160 mA |
Emitted interference | EN 61000-6-4:2007 |
Noise immunity | IEC 62026-2:2013 EN 61326-3-1:2017 EN 61000-6-2:2005 |
Directive 2014/30/EU | IEC 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007 EN 61326-1:2013 |
Supply | from AS-Interface |
Fieldbus standard | EN 62026-2:2013 |
LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
Voltage | (U - 7.0 V) ≤ U ≤ U |
Climatic conditions | For indoor use only |
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface (PELV) |
UL File Number | E223772 |
Number/Type | 2 conventional electronic outputs, PNP , overload and short-circuit resistant |
Functional safety | EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 |
Surge protection | U : Over voltage category III, safe isolated power supplies (PELV) |
Electrical safety | IEC 61140:2009 |
AS-Interface specification | V3.0 |
AS-Interface | EN 62026-2:2013 |
Directive 2006/42/EC | EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 |
Slave type | Safety-Slave |
Required master specification | ≥ V2.1 |
LED IN | switching state (input); 2 LED yellow |
Profile | S-7.B |
IO code | 7 |
ID code | B |
ID1 code | F |
ID2 code | 0 |
D0 | dyn. safety code 1 OUT 1 |
D1 | dyn. safety code 1 OUT 2 |
D2 | dyn. safety code 2 - |
D3 | dyn. safety code 2 - |
P0 | not used |
P1 | not used |
P2 | not used |
P3 | not used |
LED FAULT | error display; LED red red: communication error or address is 0 |
LED OUT | Switching state (output); 2 LED yellow |
Pulse withstand voltage | 0.8 kV |