Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 3344 |
| MTTF | 160 a at 30 °C |
| Ambient temperature | 0 ... 70 °C (32 ... 158 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Degree of protection | IP65 |
| Connection | cable piercing method or terminal compartment yellow flat cable/black flat cable or standard round cable inputs/outputs: 2 x M16 x 1.5 cable glands and cage tension spring terminals, 1 x M12 x 1.5 cable gland (not used) |
| Housing | PA 6 GF30 |
| Mass | 350 g |
| Mounting | DIN mounting rail |
| Protection class | III |
| Resolution | 16 Bit / 1 µA |
| Rated operating current | ≤ 80 mA |
| Directive 2014/30/EU | EN 62026-2:2013 |
| Supply | from AS-Interface or from external auxiliary voltage as required U |
| LED PWR | AS-Interface voltage; LED green |
| Current loading capacity | ≤ 200 mA from AS-Interface ≤ 500 mA from external auxiliary voltage U |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| UL File Number | E223772 |
| Number/Type | 2 analog inputs (currrent), 4 ... 20 mA |
| AS-Interface specification | V2.1 |
| LED AUX | ext. auxiliary voltage U ; LED green |
| AS-Interface | EN 62026-2:2013 |
| Slave type | Standard slave |
| Required master specification | ≥ V2.1 |
| Profile | S-7.3.D |
| IO code | 7 |
| ID code | 3 |
| ID2 code | D |
| P0 | mains power frequency filter P0=1, 50 Hz filter active P0=0, 60 Hz filter active |
| P1 | projecting of the 2nd channel P1=1, channel 2 is projected P1=0, channel 2 is not projected |
| P2 | Message of peripheral error P2=1, peripheral error is reported P2=0, peripheral error is not reported |
| P3 | not used |
| LED FAULT | error display; LED red red: communication error red flashing: peripheral error |
| LED ANALOG | status input signal; LED green off: 1 < 1 mA (peripheral error) green: 1 mA ≤ I ≤ 1 23 mA green flashing: I > 23 mA (peripheral error) |
| Auxiliary voltage (output) | 24 V DC ± 15 % PELV |
| (function via AS-Interface) | The transfer of the data value is based on AS-Interface Profile 7.3. |
| Input resistance | 50 Ω |
Сравнение
Избранное
