Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 72730 |
| Light source | LED |
| Light type | modulated visible red light |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| MTTF | 462 a |
| Mission Time (T | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
| Control elements | Receiver: sensitivity adjustment |
| Operating voltage | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | Emitter: ≤ 14 mA Receiver: ≤ 13 mA at 24 V supply voltage |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link |
| Signal output | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Switching frequency | 1000 Hz |
| Response time | 0.5 ms |
| Product standard | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) , fixed cable -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP67 / IP69 / IP69K |
| Connection | 300 mm fixed cable with M8 x 1, 3-pin connector |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Mass | Emitter: approx. 10 g receiver: approx. 10 g |
| Effective detection range | 0 ... 12 m |
| Threshold detection range | 15 m |
| Angle of divergence | 3.7 ° |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link Revision | 1.1 |
| Min. cycle time | 2.3 ms |
| Process data witdh | Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit |
| SIO mode support | yes |
| Device ID | Emitter: 0x110401 (1115137) Receiver: 0x110301 (1114881) |
| Test input | emitter deactivation at +U |
| Voltage drop | ≤ 1.5 V DC |
| Protection class | III |
| Housing width | 13.9 mm |
| Housing depth | 18.3 mm |
| Diameter of the light spot | approx. 65 mm at a distance of 1 m |
| Transfer rate | COM 2 (38.4 kBaud) |
| Compatible master port type | A |
| Usage category | DC-12 and DC-13 |
| Housing height | 33.8 mm |
| LED risk group labelling | exempt group |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Standards | UL 60947-5-2: 2014 IEC 61131-9:2013 EN 62471:2008 EN 61131-9:2013 |
| Emitter | OBE12M-R101-S-IO-0,3M-V3 |
| Receiver | OBE12M-R101-EP-IO-0,3M-V3 |
| EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 |
| Cable length | 0.3 m |
Сравнение
Избранное
