Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Print mark contrast sensor DK20/35A/9S20

Print mark contrast sensor DK20/35A/9S20
Print mark contrast sensor DK20/35A/9S20

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 13527
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • Diffuse mode sensor for recording any print mark
  • Static TEACH-IN: automatic switching threshold adaptation
  • Optical system exchangeable by 90°
  • 30 µs response time, suitable for extremely rapid scanning processes
  • 3 emitter colors: green, red and blue
Параметр Значение
Общие характеристики
Артикул 13527
Light source LED
Light type Visible green/red/blue, modulated light
MTTF 650 a
Mission Time (T 20 a
Diagnostic Coverage (DC) 0 %
Function indicator LED yellow; switching operation: lights up if print mark is detected Teach-In operation: flashing slowly alarm display: flashing quickly, if no safe operation is possible
Control elements Teach-In key
Operating voltage 10 ... 30 V DC
Ripple 10 %
No-load supply current ≤ 70 mA
Switching type light/dark on switchable, results from the order of the Teach-In
Signal output Push-pull output, short-circuit protected, reverse polarity protected
Switching voltage PNP: ≥ (+U -2.5 V) , NPN: ≤ 1.5 V
Switching current max. 200 mA
Switching frequency 16.5 kHz
Response time 30 µs
Product standard EN 60947-5-2
UL approval cULus Listed , Class 2 power source
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Storage temperature -20 ... 75 °C (-4 ... 167 °F)
Degree of protection IP67
Connection 5-pin, M12 x 1 connector
Housing PC (glass-fiber-reinforced Makrolon)
Optical face glass
Mass 200 g
Function input Teach-In input
Timer function rising edge , mono stable
Housing width 33 mm
Housing depth 60.8 mm
Pulse length 20 ms
Angle deviation max. ± 3°
Housing height 85.6 mm
Vibration resistance IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Sensor range 25 mm ± 6 mm
Light spot representation 2 mm x 8.5 mm , light spot parallel to housing
Continuous light 7000 Lux
Shock and impact resistance IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Teach-In static Teach-In

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено