Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
| Параметр | Значение |
| Общие характеристики | |
| Артикул | 67155 |
| Light source | IRED |
| Light type | modulated infrared light , 850 nm |
| Ambient light limit | Not sensitive to ambient light in accordance with IEC 61496-2 |
| Mission Time (T | 20 a |
| Function indicator | Green: OSSD ON , Red: OSSD OFF |
| Operating voltage | 24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC |
| No-load supply current | Transmitter unit:≤ 150 mA Receiver: ≤ 150 mA (without outputs) |
| Signal output | PNP-semiconductor, short-circuit protected, 0.1A |
| Switching voltage | ON: U - 2 V; OFF: < 1 V |
| Switching current | ON: max. 0.1 A; OFF: < 5 µA |
| Response time | see Table 1, max. 54 ms |
| Product standard | EN 61496-1 ; IEC 61496-2 |
| CE conformity | CE |
| UL approval | cULus Listed |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | -35 ... 60 °C (-31 ... 140 °F) |
| Storage temperature | -35 ... 70 °C (-31 ... 158 °F) |
| Degree of protection | IP67 , For indoor use only |
| Connection | Transmitter unit: 4-pin, M12 x 1 connector Receiver: 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm Max. cable length 50 m |
| Housing | extruded aluminum section , gold anodized |
| Optical face | Plastic pane , Transparent polycarbonate |
| Mass | see table 2 |
| Power consumption | Transmitter unit: 5 W Receiver: 15 W |
| Type | 4 |
| Relative humidity | max. 95 %, not condensing |
| Effective detection range | 0.4 ... 8 m |
| Operating mode | Startup/restart disable, deactivateable |
| Optical resolution | 14 mm |
| Angle of divergence | < 5 ° |
| Operation indicator | green: Power on |
| Status indicator | Transmitter unit: LED yellow: Mode, test or error Receiver: LED yellow: Start readiness, function reserve or error |
| Protection class | III , IEC 61140 |
| Housing length L | see table 2 |
| Output type | Receiver signal output start readiness |
| Function | Beam Code A: open or 0 V Beam Code B: 24 V DC, 5 mA |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Input type | Receiver unit, mode A/B (see transmitter unit, mode A/B) |
| Safety Integrity Level (SIL) | SIL 3 |
| Category | Cat. 4 |
| UL File Number | E215245 |
| Performance level (PL) | PL e |
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 |
| TÜV approval | TÜV |
| PFH | Depending on the protection field height; see Manual |
| Protection field height | see Table 1, max. 1200 mm |
| Input format | Break contact |
| Input current | 5 mA |
Сравнение
Избранное
