Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ
Доставка в любой регион России транспортной
компанией на Ваш выбор
Параметр | Значение |
Общие характеристики | |
Артикул | 73014 |
Light source | laser diode |
Light type | modulated visible red light |
Ambient light limit | EN 60947-5-2 : 30000 Lux |
MTTF | 560 a |
Mission Time (T | 20 a |
Diagnostic Coverage (DC) | 0 % |
Function indicator | LED yellow: constantly on - switch output active constantly off - switch output inactive |
Control elements | 5-step rotary switch for operating modes selection |
Operating voltage | 10 ... 30 V DC |
Ripple | max. 10 % |
No-load supply current | < 25 mA at 24 V supply voltage |
Switching type | The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally open, PNP normally closed |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA , resistive load |
Repeat accuracy | ≤ 0.1 mm |
Response time | 2 ms |
Product standard | EN 60947-5-2 |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Ambient temperature | 10 ... 60 °C (50 ... 140 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Degree of protection | IP67 / IP69 / IP69K |
Connection | 300 mm fixed cable with M12 x 1, 4-pin connector |
Housing | PC (Polycarbonate) |
Optical face | PMMA |
Mass | approx. 17 g |
Angle of divergence | approx. 0.6 ° |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Interface type | IO-Link ( via C/Q = pin 4 ) |
IO-Link Revision | 1.1 |
Min. cycle time | 3 ms |
Process data witdh | Process data input 3 Byte Process data output 2 Bit |
SIO mode support | yes |
Device ID | 0x110902 (1116418) |
Voltage drop | ≤ 1.5 V DC |
Communication interface | IEC 61131-9 |
Protection class | III |
Housing width | 11 mm |
Housing depth | 21.5 mm |
Measurement range | 20 ... 50 mm |
Reference target | standard white, 100 mm x 100 mm |
Note | LASER LIGHT , DO NOT STARE INTO BEAM |
Laser class | 1 |
Wave length | 680 nm |
Beam divergence | > 5 mrad d63 d63 < 1 mm in the range of 50 mm ... 250 mm |
Pulse length | 3 µs |
Repetition rate | approx. 3 kHz |
max. pulse energy | 15.2 nJ |
Angle deviation | max. +/- 1.5 ° |
Diameter of the light spot | approx. 0.5 mm at a distance of 50 mm |
Resolution | 0.01 mm |
Device profile | Smart Sensor |
Transfer rate | COM 2 (38.4 kBaud) |
Compatible master port type | A |
Usage category | DC-12 and DC-13 |
Laser safety | EN 60825-1:2014 |
Temperature drift | 20 µm/K |
Warm up time | 5 min |
Linearity error | ± 0.2 mm |
FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
Housing height | 44.5 mm |
Cable length | 0.3 m |