Корзина 0 0
Электротехническое оборудование

Пт-Пн: 9:00 - 18:00

Float Switch LFL2-CK-U-PUR5-EMS

Float Switch LFL2-CK-U-PUR5-EMS
Float Switch LFL2-CK-U-PUR5-EMS

Для оформления заявки добавьте оборудование
в корзину и сформируйте заказ

артикул: 58980
Под заказ
Запрос цены

Доставка в любой регион России транспортной
компанией на Ваш выбор

  • Switch element: microswitch, mercury-free
  • Limit value detection for fluids
  • Sleeve design: small diameter, mounting through G1 tap hole possible
Параметр Значение
Общие характеристики
Артикул 58980
Материал float: PP (Polypropylene) cable: PUR, highly flexible (3 x 0.50 mm )
Ambient temperature 5 ... 70 °C (41 ... 158 °F)
Storage temperature -25 ... 70 °C (-13 ... 158 °F)
Degree of protection IP68
Switching point switch angle, measured against the horizontal: - upper switch point +25° ±10° - lower switch point -14° ±10°
Altitude ≤ 2000 m above MSL
Length 5 m
Rated insulation voltage 300 V
Supplementary information Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Contact loading 250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load
Equipment architecture This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.
Directive 2014/35/EU EN 60947-5-1:2004 + Cor.:2005 + A1:2009
Description microswitch with switching ball, change-over contact
Electrical life ≥ 5 x 10 switching cycles
Pulse withstand voltage 4 kV
Process pressure (static pressure) ≤ 3 bar (43.5 psi) at 20 °C (68 °F)
Density ≥ 0.8 g/cm
Installation instructions range of application and minimum length between mounting and float: ≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluids mounting: - The float switch is mounted either from sidewards through a cable gland ≥ G1A into the vessel or - by means of a counter weight or rods (e. g. float switch combination) from the top. The pivot of the cable should always be horizontal.

Техподдержка

Опишитите свой вопрос, специалист службы технической поддержки свяжется с Вами в течении нескольких часов

Отправляя заявку, вы принимаете условия Политики конфиденциальности.

Спасибо!

Ваше сообщение успешно отправлено